Russell Hobbs 20630 Manual

Russell Hobbs 20630 Manual

Hide thumbs Also See for 20630:

Advertisement

r
20630
I www.russellhobbs.com
Register online for an EXTRA year guarantee
Visit www.russellhobbs.co.uk/productregister/ You must register within 28 days of purchase

Advertisement

Table of Contents
loading

Summary of Contents for Russell Hobbs 20630

  • Page 1 20630 I www.russellhobbs.com Register online for an EXTRA year guarantee Visit www.russellhobbs.co.uk/productregister/ You must register within 28 days of purchase...
  • Page 3: Important Safeguards

    Read the instructions, keep them safe, pass them on if you pass the iron on. IMPORTANT SAFEGUARDS Follow basic safety precautions, including: This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been supervised/instructed and understand the hazards involved.
  • Page 4: Temperature Setting Guide

    • Don’t use the appliance for any purpose other than those described in these instructions. • Don’t scratch the soleplate – avoid buttons, zips, etc. • Don’t wrap the cable round the appliance • The appliance has a protective thermal fuse, which will blow if it overheats. If this happens the appliance will stop working and must be returned for repair.
  • Page 5: Steam Ironing

    If the instructions on the fabric label differ from this guide, follow the instructions on the label. FILLING You may use the iron with tap-water, but if you live in a hard water area, you should use distilled water (not chemically descaled or softened water). If you buy distilled water, check that it’s suitable for use in irons.
  • Page 6: Shot Of Steam

    SHOT OF STEAM Steam is available when the temperature control is at S or above. Lift the iron off the fabric. Press the ~ button. Leave 4 seconds between shots, to let the temperature build up. DRY IRONING Set the steam control to S. Wait until the light goes off then start ironing.
  • Page 7: Self Clean

    Wipe outer surfaces with a damp cloth. Remove spots from the soleplate with a little vinegar – take care not to scratch Store the iron on its heel, to avoid corrosion and damage to the soleplate. SELF CLEAN To avoid scale build up, use the self clean function at least monthly in normal water areas, more often in hard water areas.
  • Page 12 SERVICE If you ring, have the model number to hand, as we won’t be able to help without it. It’s on the rating plate (usually underneath the product). The product isn’t user-serviceable. If it isn’t working, read the instructions, check the plug fuse and main fuse/circuit breaker.

Table of Contents