Lan Configuration; Power Throttling Configuration; Ip Address - Dell PowerEdge C6100 Hardware Owner's Manual

Option
Clear BMC System Event Log Clears BMC System Event Log.
BMC PEF status
Set BMC NIC
(Shared default)
Set LAN Configuration

LAN Configuration

Option
Channel Number
(01 default)
BMC IP address source
(DHCP default)

Power Throttling Configuration

Option
Power Throttling
Power CAP
Chassis CAP
NOTE:
The default values are dependant on BMC setting

IP Address

Option
IP Address (default value
depends on BMC setting)
50
Using the System Setup Program
Description
Displays BMC PEF status.
Sets the type of BMC NIC from BIOS. BMC is reset.
Allows LAN Configuration settings.
Description
Enters channel number for SET LAN Config
Command. Proper value is below 16.
Sets BMC IP address source from BIOS.
Description
Enable or disable Power throttling
Enable or disable Power CAP
Set Chassis CAP value
Description
Enters IP address in decimal in the form of
XXX.XXX.XXX.XXX (XXX is less than 256 and in
decimal only).
NOTE:
When BMC IP status is static, IP Address is
useful