Original BTC Crosby 1 Instruction Manual

Safety & Installation Instructions
These instructions are provided for your safety in order to prevent the risk of Fire, Electric shock or
Injury. Please retain for future reference. When fitting is in operation, the metal parts may become
hot; take care when using/handling.
- Ensure the lamp type and max wattage is followed - do not exceed. Take care not to overtighten
the lamp.
- Do not touch the lamp or lampholder while in operation, as both may become hot.
- Turn off and unplug fitting, leaving lamp to cool before changing lamp. Dispose of old lamps
carefully.
- Adjust the light fitting only when power to the fitting is off and it has been left to cool.
- Never leave a fitting without a lamp in position (as someone may accidentally touch the contacts).
- Keep light fitting away from combustible materials such as soft furnishings.
- Ensure children do not play with the light fitting.
- Ensure the light is positioned on a solid, level and non-slip surface and make sure the position of
the cable does not pose a trip hazard.
- If the external flexible cable or cord of this luminaire is damaged, it shall exclusively be replaced by
the manufacturer or his service agent, or a similar qualified person, in order to avoid a hazard.
- For use in a dry, indoor environment only. Ensure the fitting does not come into contact with any
liquids.
Cleaning & Maintenance
Metal finishes should only be cleaned with a soft, dry cloth. Do not use polishes or abrasives. The
glass body can be cleaned by hand, using a soft damp cloth with a diluted mild detergent
(nonabrasive) if necessary - avoid contact with the metal finishes. Switch off power to the fitting
before cleaning.
When handling the light, always support from below - do not lift directly from the glass or the metal
!
components above.
Established in 1990, Original BTC manufactures relaxed, familiar lighting for traditional and
contemporary homes. All products are hand-assembled in Oxfordshire from high quality
components, produced in the UK.
ORIGINALBTC.COM
+44 (0)1993 882 251
UNIT 21 / 22 AVENUE ONE, STATION LANE, WITNEY, OX28 4XZ, ENGLAND
Crosby 1/2/3
v1.1-04.24
Instruction Manual
Crosby 1
US-FT705AN/BR
LAMP GUIDANCE
MADE IN BRITAIN
BASE SHAPE
Table Light
US-FT705AN/BR, US-FT706AN/BR, US-FT707AN/BR
Crosby 2
US-FT706AN/BR
WATTAGE**
TYPE*
Crosby 3
US-FT707AN/BR