Safety & Installation Instructions
ENG WARNING – RISK OF FIRE AND ELECTRIC SHOCK.
SUITABLE FOR DRY LOCATIONS ONLY
FR
ATTENTION – RISQUE D'INCENDIE, RISQUE DE CHOC.
POUR EMPLACEMENTS SECS SEULEMENT
- Ensure the lamp (bulb) type and max wattage is followed - do not exceed. Take care not to
overtighten the lamp.
- Do not touch the lamp or lampholder while in operation, as both become very hot.
- Turn off and unplug the fitting, leaving to cool before changing the lamp. Dispose of old lamps
carefully.
- Adjust the light only when power to the fitting is off and it has been left to cool.
- Never leave a fitting without a lamp in position.
- Keep the light fitting away from combustible materials such as soft furnishings.
- Ensure children do not play with the light fitting.
- Ensure the light is positioned on a solid, level and non-slip surface and make sure the position of
the cable does not pose a trip hazard.
- If the electrical flex or electrical components become damaged at any point, the fitting must be
unplugged from the power supply immediately and not operated until the damaged parts are
fixed/replaced.
- For use in a dry, indoor environment only. Ensure the fitting does not come into contact with any
liquids.
Cleaning and Maintenance
All brass components can be cleaned with a metal polish to remove tarnishing with the exception of
the flexible arm. Do not use polishes or abrasives on the flexible arm as this may compromise
the fittings ability to maintain its shade position. Bone china can be cleaned by hand, with a soft
damp cloth with a diluted, mild detergent (nonabrasive) if necessary. Switch off power to the fitting
before cleaning.
!
When handling the light, always support from below - do not lift from the bone china shade.
Established in 1990, Original BTC manufactures relaxed, familiar lighting for traditional and
contemporary homes.
All products are hand-assembled in Oxfordshire from high quality components, produced in the UK.
ORIGINALBTC.COM
+44 (0)1993 882 251
UNIT 21 / 22 AVENUE ONE, STATION LANE, WITNEY, OX28 4XZ, ENGLAND
Alma
Table Light
v1.4-10.22
Instruction Manual
MADE IN BRITAIN
BASE
SHAPE
WATTAGE**
TYPE*
US-FT701
Need help?
Do you have a question about the Beata Heuman Alma and is the answer not in the manual?
Questions and answers