Non-Optimal Memory Configurations; Poweredge 2950 Iii - New System Features; New Performance Features; New High-Efficiency Power Supply And Power Monitoring Features - Dell PowerEdge 2950 Information Update

Non-Optimal Memory Configurations

The POST may halt when a non-optimal memory configuration is detected
and the following message is displayed:
Non-Optimal Memory Configuration
Press F1 to continue or F2 for Setup
NOTE:
Mixing DIMMs of different speeds renders the memory configuration
non-optimal. The system clocks down the performance to the slowest speed
in the DIMM set for the channel.
PowerEdge 2950 III – New System Features

New Performance Features

• Two dual-core or quad-core Intel
processors.
• 8-GB memory module support.

New High-Efficiency Power Supply and Power Monitoring Features

• Higher system efficiency on power conversion across workloads.
• Baseboard Management Control (BMC) power monitoring monitors
current, voltage, and power utilization in the system.
® ®
Xeon 5400 Series and 5300 Series
Information Update
5