Table of Contents
Advertisement
Installation
How to connect the COMPONENT
VIDEO Input Terminals
(DVD Player)
Audl_
DVD(¥ p,, _,,, OUT
p,
OUT
L
oo 66®
r_
Note:
Similar connections are available at the COMPONENT
VIDEO Input 1, 2 Terminals.
n
(Dl@ qu
VIDEO
O0
OJO
AUDIO
OIO <_
How to connect the DIGITAL IN Terminals
1. Connecting
a D'IV Decoder to DIGITAL IN
When connecting a D'R/decoder to DIGITAL-IN, be sure not to select "SKIP" or "PC" from the INPUT LABEL menu. Failing
to do so may result in a distorted display or black out (refer to page 36).
DIGITAL IN terminals
DTV Decoder
DIGITAL IN cable
(Supplied)
K1HA24DA0005
(2 m)
1
2 x RCA plug
By inputting a High-bandwidth
Digital Content Protection high-definition picture source to the DIGITAL IN terminal of this
television, high-definition pictures can be displayed on the screen in their digital form. (This terminal is for use in the future
when High-bandwidth
Digital Content Protection DTV decoders, DVD players and D-VHS are put on the market.)
Note:
The DIGITAL IN terminal can only be used with 1080i, 720p and 480p picture signals. Set the D'TV Decode DIGITAL OUT
terminal Output setting to 1080i, 720p or 480p. For detailed information, refer to the DTV decoder instruction manual. If
you cannot display the picture because your DTV decoder does not have a DIGITAL OUT terminal Output setting, use the
component Video Input (or the S Video Input or Video Input). In this case the picture will be displayed as an analog signal.
11
Advertisement
Table of Contents
