How To Connect The Pc Input Terminals; Digital And Analog Rgb Signals That Can Be Input - Panasonic PT-52DL52 Operating Instructions Manual

How to connect the PC Input Terminals

COMPUTER
Signal Names for D-SUB 15P Connector
5 4 3 2 1
10 9 8 7 6
15 14 13 12 11
Pin Layout for PC Input
Terminal
Notes:
(1) The PC input terminals are DDC1/2B-compatible. If the computer being connected is not DDC1/2B-compatible, you will
need to make setting changes to the computer at the time of connection.
(2) Some PC models cannot be connected to the set.
(3) There is no need to use an adapter for computers with PC / AT compatible D-SUB 15P terminal.
(4) The computer shown in the illustration is for example purposes only.
(5) Additional equipment and cables shown are not supplied with this set.
(6) The picture will become dark if a PC signal with a vertical scanning frequency of 62 Hz is input. To obtain the optimum
picture quality with the projection TV, a vertical scanning frequency of 60 Hz is recommended.
(7) Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the specified
frequency range.

Digital and analog RGB signals that can be input

The table below lists the different types of digital and analog RGB signals that can be input.
If a signal which differs greatly from any of the types listed below is input, the picture
image may not be displayed correctly, or a black background may displayed.
Display mode name No. of dots (H
VGA400
VGA480
SVGA
XGA
MAC16
720p
Note:
The number of dots for this set is 800
will be converted to 800
Conversion adapter (if necessary)
Connect a cable that matches
the audio output terminal on the computer.
Pin No. Signal Name
1
2
3
4 GND (Ground)
5 GND (Ground)
Horizontal scanning
V)
frequency (kHz)
640 400
640 480
800 600
1024 768
832 624
1280 720
600 for NORMAL display. Number of dots other than 800
600 (with the exception of MAC 16, which will be displayed in 832
RGB
PC cable
(supplied)
K1HA30DA0003 (2 m)
Audio
Pin No. Signal Name
R 6 GND (Ground)
G 7 GND (Ground)
B 8 GND (Ground)
9 NC (not connected)
10 GND (Ground)
Vertical scanning
frequency (Hz)
31.5 70.1
31.5 59.9
37.9 60.3
48.4 60.0
49.7 74.6
45.0 60.0
Installation
INPUT 4
PC INPUT
VIDEO
D-SUB 15P
2 RCA plug
Pin No. Signal Name
11 GND (Ground)
12 SDA
13 HD / SYNC
14
15 SCL
Mark:
Input signal can be displayed.
DIGITAL PC INPUT
IN (Analog)
600 in the above data,
624 dots).
L-AUDIO-R
VD
13