Adding Accessory Handsets
Your.phone.supports.up.to.ten.(0).handsets,.including.any.handsets.supplied.with.your.phone..Accessory.handsets.
do.not.need.to.be.connected.to.a.phone.jack..You.can.now.place.a.fully-featured.cordless.handset.anywhere.AC.
power.is.available.to.connect.the.handset.charger..All.the.handsets.ring.when.a.call.is.received.
Compatible Handsets
Your.phone.is.compatible.with.the.TCX930..If.you.purchase.an.accessory.handset,.you.must.register.the.handset.to.
the.base.before.use..Accessory.handsets.will.not.operate.until.they.are.registered.
Charging Accessory Handsets
The.handset.is.powered.by.a.rechargeable.battery.pack..The.battery.recharges.automatically.when.the.handset.is.
placed.in.the.charger..
)
Connect.the.AC.adapter.to.the.DC.IN.9V.jack.and.to.a.20V.
AC.outlet.that.is.not.controlled.by.a.wall.switch.
Caution:.Use.only.the.Uniden.AD-0005.adapter.
2)
Set.the.charger.on.a.desk.or.tabletop,.and.place.the.handset.
in.the.charger.with.the.keypad.facing.forward.
3)
Make.sure.that.the.charge.LED.illuminates..If.the.LED.does.
not.illuminate,.check.to.see.that.the.AC.adapter.is.plugged.
in.and.the.handset.makes.good.contact.with.the.charging.
contacts.
4)
Charge.the.handset.battery.pack.for.at.least.5-20.hours.
before using your new cordless telephone for the first time.
To AC outlet
To AC outlet
AC adapter (supplied)
AC adapter (supplied)
23
Route the
Route the
cord.
cord.
To DC IN 9V
To DC IN 9V