Intex Excursion Pro K2 Manual page 12

Paddle Assembly:
1. Press and align the push-bottom on the short shaft with the paddle blade hole,
ensure the push-bottom is securely snapped onto the paddle blade hole.
2. Join the 3 shafts together with the couplers and securely tighten the coupler covers.
3. To disassemble, reverse the assembly steps. Note: is not necessary to detach the
paddle blades from the shafts.
1 2
Deflation
For kayak hull:
1. Unscrew the cap to reveal the stem, push the stem in
and turn 90 degree right to secure it in the down position.
2. Once the deflation is completed, push the stem in and
turn 90 degree left to return it into the inflation position.
3. Replace the cap back.
For seat & seat booster pad:
1. Pull valve cap out and squeeze the valve at its base
untill deflated.
2. Close and recess the valve back.
Safety and Operating Instructions
Before Departing from the Shore or Dock
Know all required information and inform your passengers:
• Take a boating safety course and get hands-on training from your boat dealer or local
boating authorities.
• Know all local regulations and hazards related to water activities and boat operation.
• Check weather forecast, local currents, tides and wind conditions.
•
Advise someone on land of the time you plan to be back at your starting point.
•
Explain basic boat operation to all passengers.
• Children and non-swimmers need special instructions in the use of life jacket or personal
floatation devices (PFD).
• Be sure that one of your passengers can operate the boat in case of emergency.
•
Learn how to determine the distance you can cover, and remember that bad weather
conditions can alter this.
• Review all safety requirements regularly.
Check the working condition of the boat and equipments:
•
Check inflation pressure.
• Inspect the valves caps.
• Check the load is evenly distributed, fore (front) to aft (back) and side-to-side.
SAVE THESE INSTRUCTIONS
(84IO) EXCURSION PRO KAYAK ENGLISH 4.875" X 7.25" 10/10/2023
3 4
A
Page 8
86" (218cm)
B C
84
A