Cutout Dimensions/Requirements - Whirlpool GLT3034LT - Gas Cooktop Installation Instructions Manual

Countertop opening dimensions that are
shown must be used. Given dimensions
provide required clearances.
Replacement instructions: Use minimum
dimensions given.
Mobile home installation: The installation
of this cooktop must conform to
the Manufactured Home
Construction and Safety
Standards, Title 24 CFR, Part 3280
(formerly the Federal Standard for
Mobile Home Construction and
Safety; Title 24 HUD part 280); or
when such standard is not
applicable, the Standard for
Manufactured Home Installations
(Manufactured Home Sites,
Communities and Setups), ANSI
A225.1 — latest edition**, or with
local codes.
In Canada, the installation of this
cooktop must conform with the
current standards CAN/CSA-Z240
— latest edition***, or with local
codes.
*NOTE: 24" (61 cm) min. clearance if bottom of wood or
metal cabinet is protected by not less than 1/4" (0.6 cm)
flame retardant millboard covered with not less than No.
28 MSG sheet steel, 0.015" (0.04 cm) stainless steel, or
0.024"(0.06 cm) aluminum or 0.020" (0.05 cm) copper.
30" (76.2 cm) min. clearance between top of cooking
platform and bottom of unprotected wood or metal
cabinet.

Cutout dimensions/requirements

See NOTE*
for minimum
clearances.
Do not seal cooktop
to countertop.
24" (61 cm) min. –
deep countertop is
required.
Cooktop width
15"
(38.1 cm)
30"
(76.2 cm)
36"
(91.4 cm)
42"
(106.7 cm)
Important note on base cabinet construction: After making
the countertop cutout, some installations may require
notching down the base cabinet side walls to clear the
burner box. To avoid this modification, use a base cabinet
having sidewalls wider than the cutout.
NOTE: If cabinet has a drawer, a 4" (10.2 cm) depth clearance from the top of
the countertop to the top of the drawer (or other obstruction) in base cabinet is
required. The drawer depth may need to be shortened to avoid interfering with
the regulator.
combustible area
above
countertop
Gas line opening –
Wall: anywhere 5" (12.7 cm)
below underside of countertop.
Cabinet floor: anywhere within
6" (15.2 cm) of rear wall is
recommended.
Illustration dimensions
13-3/4" 19"
(34.9 cm) (48.3 cm) (38.1 cm)
29" 19"
(73.7 cm) (48.3 cm) (76.2 cm)
35-1/4" 19"
(89.5 cm) (48.3 cm) (91.4 cm)
42-3/4" 19"
(108.6 cm) (48.3 cm) (106.7 cm) (5.4 cm)
13" (33 cm)
recommended
upper cabinet
depth
18" (45.7 cm) min.
clearance upper
cabinet to countertop
within minimum
clearances to cooktop
Grounded outlet –
Locate within 24"
(61 cm) of right
rear corner of
cutout.
min.
15" 2-1/8" 2-7/8"
(5.4 cm) (7.3 cm)
30" 2-1/8" 2-7/8"
(5.4 cm) (7.3 cm)
36" 2-1/8" 2-7/8"
(5.4 cm) (7.3 cm)
42" 2-1/8" 2-7/8"
(7.3 cm)
Minimum distance to
combustible surface
above countertop
5-5/8"
(14.3 cm)
5-5/8"
(14.3 cm)
5-5/8"
(14.3 cm)
11-1/2"
(28.4 cm)
3