Serial Plate Location; Product Record; Surface Cooking - Kenmore 4123 - Elite 30 in. Electric Cooktop Use And Care Manual

Serial Plate Location
You will find the model and serial number printed on
the serial plate. The serial plate is located under the
cooktop.
Please see the illustration for exact location.
Remember to record the serial number for future
reference (See Product Record below).
Serial plate is
located under the
burner box.
Product Record
In this space below, record the date of purchase, model and serial number of your product. You will find the model and
serial number printed on the serial plate. This serial plate is located under the cooktop.
ModeINo. 790.
Serial No.
Date of purchase
Save these instructions and your sales receipt for future reference.
Surface Cooking
Use Proper Cookware
Cookware should have t'_
flat bottoms that make
good contact with the
entire surface heating
element. Check for
flatness by rotating a
ruler across the bottom
of the cookware (See
Figure 2). Be sure to
follow the
recommendations for
using cookware as
shown in Figure 1.
Figure 2
Note: The size and type of cookware
used will influence the setting needed
for best cooking results.
CORRECT
t" 1"
• Flat bottom and straight
sides.
= Tight fitting lids.
Weight of handle does not tilt
pan. Pan is well balanced.
Pan sizes match the amount
of food to be prepared and the
size of the surface element.
Made of material that
conducts heat well.
Easy to clean.
Always match pot diameter to
element surface diameter.
INCORRECT
Curved and warped pan bottoms.
_ijiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_iiO0000i;
Pan overhangs unit by more than
one-half inch.
!
v
Pan is smaller than the element.
Heavy handle tilts the pan.