Advertisement
Quick Links
1
Remove the SSD enclosure cover on the bottom of the
stand.
3
Insert the SSD at a slight angle (35-45°) and ensure it is fully
seated in the PCIe slot.
Important: This stand is not compatible with SSDs that have
pre-installed heat sinks or are double-sided.
5
Carefully reattach the enclosure cover: insert the side clips
first, then slide the door into place.
MAC MINI M4 STAND & HUB
WITH NVME ENCLOSURE
INSTALLING NVME SSD
QUICK GUIDE
2
Before installing NVMe SSD, first apply the included thermal
tape.
The side with the blue film should be in contact with the
SSD. The clear film adheres to the enclosure.
4
Secure the SSD using the included screwdriver and screw.
Tip: To prevent stripping the screw, do not overtighten.
6
Flip the stand back over.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Satechi ST-GNMMES
Summary of Contents for Satechi ST-GNMMES
- Page 1 QUICK GUIDE MAC MINI M4 STAND & HUB WITH NVME ENCLOSURE INSTALLING NVME SSD Remove the SSD enclosure cover on the bottom of the Before installing NVMe SSD, first apply the included thermal stand. tape. The side with the blue film should be in contact with the SSD.
- Page 2 HDMI HDMI Place the stand on a flat surface and use the USB-C cable to Easily access the power button through the cutout. connect to your M4 Mac Mini. Supports Mac Mini (M4, 2024). Does not support M2, M1, or 2018 Mac Mini or Mac Studio models.
Need help?
Do you have a question about the ST-GNMMES and is the answer not in the manual?
Questions and answers