Advertisement
Quick Links
QUICK GUIDE
DUAL DOCK STAND
DOCKING STATION WITH NVME SSD ENCLOSURE
1
Connect the dual cable connectors to the dual USB-C ports on your host device.
Both cables must be connected in order for full functionality
2
If using with a host device other than a MacBook, slide the aluminum cable cover down to release the cables.
Both cables must be connected in order for full functionality
3
DP
HDMI
HDMI
5Gbps
10Gbps
5Gbps
10Gbps
4K/60Hz
4K/60Hz
4K/60Hz
ON
OFF
ON
OFF
ON
OFF
Slide the power switch to the left from red to green in order to turn on the Dock.
White LED will turn on signifying the dock is on
Advertisement
Related Manuals for Satechi DUAL DOCK STAND
Summary of Contents for Satechi DUAL DOCK STAND
- Page 1 QUICK GUIDE DUAL DOCK STAND DOCKING STATION WITH NVME SSD ENCLOSURE Connect the dual cable connectors to the dual USB-C ports on your host device. Both cables must be connected in order for full functionality If using with a host device other than a MacBook, slide the aluminum cable cover down to release the cables.
- Page 2 PORTS AND CONNECTORS HDMI HDMI HDMI HDMI 10Gbps 5Gbps 10Gbps 5Gbps 5Gbps 4K/60Hz 4K/60Hz 4K/60Hz 4K/60Hz 4K/60Hz UP TO UP TO 4K/60Hz Use the USB-C PD port to charge your device up to 75W. Use HDMI cables to connect up to two HDMI-enabled ~15W is used for the docks operation monitors.
- Page 3 4K/60Hz 5Gbps Before installing, ensure the Dual Dock Stand is not connected to power. Disconnect from host device and disconnect any power delivery cables connected to the Dock To install the SSD, press and lift the latch on the SSD cover.
- Page 4 HDMI 5Gbps 10Gbps 4K/60Hz 4K/60Hz Connect the dual cable connectors to the dual USB-C ports Connect Dual Dock Stand to the power source. on your host device. Both cables must be connected in order for full functionality HDMI HDMI 5Gbps...
Need help?
Do you have a question about the DUAL DOCK STAND and is the answer not in the manual?
Questions and answers