Hardware Contents; Preparation; Safety Information - Utilitech RE1415-CCT-03LF4-U Manual

HARDWARE CONTENTS (shown actual size)
Steel mounting plate
with adhesive back
Qty. 4

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble
the product.
Estimated Assembly Time: 10 minutes

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the
product.
• DO NOT puncture, damage, or dismantle the light or attempt to replace the battery.
• Avoid dropping the LED light as damage to the PC cover or other electronic components can occur.
• Keep the LED light away from fire, corrosive and/or explosive chemicals, medical equipment, and
other electronic devices including magnetized data devices as damage can occur.
• The battery works between 32°F (0°C) to 113°F (45°C). If the battery is hotter or colder, the light may
malfunction.
• Charge the LED light, which contains a lithium-ion battery, to its full capacity before operation or
prolonged storage.
• Do not hang over beds or on wallpaper.
• Use only in dry locations.
• If parts are loose or damaged, please contact manufacturer.
• Periodically inspect USB-C charging cord to ensure no damage to the cord or connecting port are
present before plugging into product.
NOT INTENDED FOR OUTDOOR USE. DISCOLORATION MAY OCCUR WHEN EXPOSED TO
SUNLIGHT FOR EXTENDED PERIODS OF TIME.
AA
3