Whirlpool AKZM 756 Manual page 12

To delay the end of cooking time, and thus also the cooking start time, proceed as follows:
1. Turn the "Browse" knob to display the time you wish cooking to end (for example 16:00).
2. Confirm the selected value by pressing button
that the setting has been made correctly.
3. The oven will automatically delay the start of cooking so as to finish cooking at the set time.
At any time, however, set values (temperature, grill setting, cooking time) can be changed using button
to go back, followed by the "Browse" knob to change values and button
INDICATION OF THE RESIDUAL HEAT INSIDE THE OVEN
If at the end of cooking, or when the oven is switched off, the temperature inside the oven is over 50°C, the
display shows the word HOT and the current temperature. When the residual heat reaches 50°C, the display
shows the current time again.
TIMER
This function can be used only with the oven switched off and is useful, for example, for monitoring the
cooking time of pasta. The maximum time which can be set is 23 hours and 59 minutes.
1. With the "Functions" knob at zero, turn the "Browse" knob to display the desired time.
2. Press button to start the countdown. When the set time has elapsed, the display will show "00:00:00"
and an acoustic signal will sound. To mute the acoustic signal, press button
on the display).
KEY-LOCK
This function can be used to lock the buttons and knobs on the control panel.
To activate it, press
with the buttons are locked and the display shows a key symbol. This function can also be activated during
cooking. To deactivate it, repeat the above procedure. When the key-lock function is activated, the oven can
be switched off by turning the knob to 0 (zero). In this case, however, the previously selected function will have
to be set again.
and at the same time for at least 3 seconds. When activated, the functions associated
: the two dots of end of cooking time flash, indicating
GB36
to confirm.
(the time of day appears