Configuring Battery Settings; Configuring The Ups For An Ebm - Dell 5600R OL HV-US 5600W User Manual

Configuring Battery Settings

Configure the UPS settings for an installed EBM, including whether to run automatic battery tests and
automatic restart configuration.

Configuring the UPS for an EBM

If the UPS is not configured for the EBM, the UPS reports less battery time remaining on the UPS front
panel and to any remote software. You may receive a shutdown warning prematurely. To ensure
maximum battery runtime when using power management software, configure the UPS for the EBM:
1
Press the button for longer than one second to go to the main menu selection and scroll down to
the Settings menu using the
2
Press the button to enter the Settings menu.
3
Use the button to scroll to the External Battery Modules option and press the
The battery number value begins to flash.
4
Set the battery number value using the
UPS only (internal batteries)
Runtime is automatically adjusted based on present load levels and whether an EBM is configured.
NOTE:
5
Press the button to confirm.
|
52
Operation
button.
Configuration
UPS + 1 EBM
and buttons.
button.
Setting
0 (default)
1