Rackmount Setup - Dell 5600R OL HV-US 5600W User Manual

Rackmount Setup

CAUTION:
The cabinet is heavy (see page 62): 1) Dell strongly recommends to remove the battery tray from the
UPS before lifting. 2) Lifting the cabinets into the rack requires a minimum of two people.
CAUTION:
Removing the batteries should be performed or supervised by personnel knowledgeable about
batteries and the required precautions. Keep unauthorized personnel away from batteries.
CAUTION:
If installing an optional EBM, install the EBM directly below the UPS.
NOTE:
Mounting rails are required for each individual cabinet.
To install the UPS and optional EBM in a rack:
1
Remove the internal battery trays from the UPS:
Loosen the thumbscrew on the battery retaining bracket and remove the bracket (see Figure 7).
Figure 7. Removing the Battery Retaining Bracket
|
17
Installation