Infors HT Celltron Operating Manual page 8

Celltron - Operating manual
Overview of the Device
Power Supply
1.2 Magnetic Clips
Page 8 of 56
Power is supplied via a power supply unit which is connected to the
operating panel. The flat-ribbon cable supplies the magnetic drive of
the shaker with power and is used for data transfer between the
operating panel and the shaker. The flip switch on the operating panel
is used to switch the power supply on and off.
The scope of delivery of the device also includes two magnetic clips
used for affixing the cables on the outer casing of the CO
You can open the magnetic clips by pushing together the black flaps.
Following that, the cables can be placed between the two sides of the
clip. The magnets stick both to closets with sheet metal exteriors and
those with stainless steel exteriors.
NOTICE
To avoid damaging the magnetic clips, they must only be used on
the outside under normal ambient conditions and not inside the CO
cabinet.
cabinet.
2
2
20.12.2023