Govee H618F Manual

Table of Contents

Contents

1 Introduction
2 What You Get
3 At a Glance
4 Installing Your Device
5 Pairing Your Device with Govee Home APP
6 Controlling the Device with Your Voice
7 Specifications
8 Troubleshooting
9 Safety Instructions
10 Documents / Resources
- 10.1 References
- 10.2 Download manual

Govee H618F Manual

Introduction

This product is composed of 2 rolls of 15-meter-long strip lights, which is embedded with Govee's cutting-edge RGBICtechnology so that each segment can be adjusted independently, creating vibrant rainbow effects. It can be controlled by Govee Home App and voice assistants such as Alexa and Google Assistant.

What You Get

LED Strip Lights	2
Adapter	1
User Manual	1
Service Card	1

At a Glance

Installing Your Device

Before You Install

Unpack the box and check all items included.
Power on the strip light and check whether it lights up.

Installing Steps

Wipe the surface to make sure it is clean and dry.
Peel off the protective film on the tape, stick the strip on and press it firmly.
Peeloff the protectivefilm on the control box and stick it on. Place the control box close to the music source to achieve the best music effect.
Power on the strip lights and start using.

Pairing Your Device with Govee Home APP

What You Need
A Wi-Fi router supporting the 2.4GHz and 802.11 b/g/n bands. 5GHz is not supported.

Pairing Instructions

Download Govee Home App from App Store (iOSdevices) or Google Play (Android devices).
Turn on Bluetooth on your smartphone.
Open the app, tap the "+" icon in the top right corner and search for"H618F".
Tap the device icon and follow the on-screen instructions to complete pairing.

Controlling the Device with Your Voice

Open the app, then tap the device icon to enter detail page.
Tap the setting icon in the top right corner.
Select User Guide and follow on-screen instrutions to control the device using your voice.

Specifications

Length	2x15m/49.2ft (connected rolls)
Light Color	RGBIC
Water Resistance	NO
Control Method	App, Control Box, Voice Control
Power Supply	24VDC via Adapter

Troubleshooting

The adhesive tape is not strong enough

Make sure the installation surface is clean and dry.
Firmly press over the strip after sticking.
Reinforce the installation via more clips and tape.

Cannot connect to Bluetooth

Do not skip Bluetooth connection in the app.
Ensure Bluetooth on your smartphone has been turned on.
Your smartphone may be incompatible with the Govee Home app. Try using a different smartphone then reconnect.
Power the strip lights and your smartphone Bluetooth off then on, then try again.
Ensure that your smartphone is within 1m/3.28ft of the strip lights when connecting.
Clear any obstructions that are between the strip lights and your smartphone.

The strip lights does not display the full selected color/Some LED beads do not light up.

Please contact customer support for rapid product replacement.

Cannot sync the strip lights to the beat of my music.

Move the control box closer to the music source.
Clean the mic on the control box then try again.

Cannot connect to Wi-Fi

Do not skip the Wi-Fi connecting steps in the app.
5GHz network is not supported. Please set the router to 2.4GHz and then reset it.
Connect your phone to Wi-Fi and check whether the network works well.
Make sure you have entered the correct Wi-Fi name and password.
Change your Wi-Fi password to a brief one. 8 numbers and letters are suggested.
Connect hotspot in your phone to the strip lights and check whether the router works with the strip lights.

Cannot connect to Alexa

Pull out every connective part of the strip lights and firmly re-connect them.
Re-connect your phone to Wi-Fi.
Plug out the adapter port and re-plug it in.

Customer Service
Warranty: 12-Month L imited Warranty
Support: Lifetime Technical Support
Email: support@govee.com
Official Website: www.govee.com
@Govee
@govee_official
@govee.official
@Goveeofficial
@Govee.smarthome

Safety Instructions

Read and follow all the safety instructions:

The product is not water resistant, be cautious when installing and using.
Use the product with the provided power adapter only.
Be cautious of static electricity during installation and usage. Keep the product away from sharp objects or strong corrosive chemicals.
When bending the strip light during installation, avoid folding the LED components as it may affect the product's life span.
Remove nails, metal, or other conductive objects from the installation surface before attaching the strip light, as it may cause short-circuiting.
Do not install the strip light near any heat sources.
Do not allow children to install the strip light alone.
Avoid installing the strip light near potentially dangerous sources (e.g., candles, liquid-filled objects).
Unroll the strip lights before powering on.