Table of Contents
Advertisement
Available languages
Available languages
42286-8MEE
9/3/07
•
If the need arises to change the
mains cable on your steam
generator or the iron, please return
to Morphy Richards service
department at the address on the
back page.
Special instructions
•
If your steam generator does not
work, check the following points:
Has the iron temperature control
been set to the required
temperature? Is the plug in its
socket? Is the plug itself or the
socket faulty? (Check by plugging in
another appliance).
•
To prevent damage to the textile
being ironed, follow the temperature
guide carefully. (Test on the inside of
the hem of the garment).
INSTRUCTIONS FOR USE
Temperature guide
Symbol
Control knob
Do not iron
positions
at all
Fabric
Ironing
Steaming
Dry
11:45
Page 3
•
When ironing is complete, remove
the plug from the socket, empty any
remaining water from the tank, and
allow to cool before storage.
•
If you drop or severely knock your
steam generator this could cause
internal damage even if the outside
appears alright. Have it checked by
a qualified electrician.
•
The temperature of accessible
surfaces may be high when the
appliance is operating.
WARNING: Do not use the
product on a surface which
could be damaged by heat or
steam such as a worktop or a
polish wood Surface.
If in doubt, contact Morphy
Richards.
(120˚C Max) Cool
Nylon, Acetates
e.g. Acrilan Courtelle, e.g. Polyester/Cotton
Orlon Triacetates,
e.g. Tricel/Polyester
Iron on wrong side
if moisture required
use damp cloth
(Not Acetate)
(160˚C Max) Warm
(210˚C Max) Hot 'Max setting'
Wool, Polyester mixtures Cotton, Linen Rayon,
Rayon mixtures,
e.g. Rayon/Linen
Fabrics requiring this setting
usually require steam
pressing for heavy cotton,
denim etc.
g
3
Advertisement
Table of Contents
