Maintenance; Emptying And Storing - Morphy Richards IB40713 Manual

Semi-electronic iron steam/spray/shot
Table of Contents

Advertisement

40715 Rev 1
31/5/05

Maintenance

Jet cleaning
Your iron has a built in cleaning system
designed to keep the water valve, steam
chamber and steam vents clear of lint and
loose mineral deposits. The 'jet clean' should
be operated after each period of ironing.
To operate, ensure that there is little water
in the tank, place the iron on its heel and turn
the temperature control dial to the maximum
setting. Wait for the beep, then unplug the
iron and hold it about 6'' (150mm) above the
sink in the ironing position. Press the shot of
steam button about 10 times in succession.
After this cleaning operation, empty out
any remaining water.
WARNING: Do not attempt to descale
the soleplate with descaling products.
To clean a stainless steel soleplate
To keep the soleplate of your iron clean
and free of limescale, we recommend that
you use one of the gentle chrome, silver or
stainless steel cleaners that are generally
available. Always follow the manufacturers
instructions. To clean off melted man-made
fibres set the iron at 3 dot position and pass
it over a clean piece of cotton which will
draw the deposit off the surface.
To clean the exterior
Allow the iron to cool and wipe over with
a damp cloth and mild detergent, then wipe
with a dry cloth.

Emptying and storing

When you have
finished ironing, unplug
your iron. Ensure that the
variable steam control is
set at the '0' position, lift
up the fill cap and empty
any remaining water out
of the filling hole.
9:11 AM
Page 7
Do not store in the box, but in an upright
position, so that any drops of water
remaining cannot leak out and discolour the
soleplate.
Important: The flex can be
damaged if wound too tightly
around the iron after use. Make
a loose loop with the flex and
wrap it around the iron. The
iron must be cool before
winding the flex and storing on
its heel.
Helpline
If you have any difficulty with your
appliance, do not hesitate to call us.
We are more likely able to help than the
store from where you bought it.
Please have the following information
ready to enable our staff to deal with your
query quickly.
• Name of the product
• Model number as shown on the underside
of the appliance.
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

40715

Table of Contents