Maintenance - Morphy Richards RN40715 Manual

RN40715 MUK Rev5:RN40715 MUK Rev5 13/05/2009 16:14 Page 6
D
Steam off
'MAX' steam
E
F
UK Helpline 0844 871 0953
6
Variable steam
Fill the iron with water as
described in 'Filling', page 5,
and insert the plug into the
electrical socket.
The steam output can be varied
from low to high by turning the
variable steam control D. When
using the iron at the bottom of
the steam range, the steam
output should be adjusted to
the low setting.
The steam facility should only
be used on garments which are
suitable for ironing at 2, 3 dot
and MAX setting.
Shot of steam
E
Press the shot of steam button
¤ to obtain a burst of extra
steam for ironing out creases in
heavy material such as denim
etc.
The shot of steam can be used
whilst dry ironing, providing
there is water in the tank, and
the temperature control is set
within the steam range.
Do not use shot of steam at
temperatures below the steam
range shown on the control dial.
Note: For optimum steam
quality, do not operate the shot
more than three times in
succession.
Vertical steam
Hold the iron in a vertical
position between 1cm and 2cm
away from the item F. Press the
shot of steam button ¤, this will
create vertical steam. This
feature is especially useful for
removing creases from hanging
clothes, curtains, wall hangings,
etc.
Note; For optimum steam
quality, do not operate the shot
more than three times in
succession.
Replacement Parts 0844 873 0719
No drip system
Your iron is fitted with a no drip
system which is designed to
prevent water escaping from the
soleplate when the iron is too
cold.
During use, the no drip system
may emit a loud click,
particularly during heat-up or
whilst cooling down. This is
perfectly normal and indicates
that the system is functioning
correctly.
Auto shut-off
Your iron is fitted with the auto
shut-off function it will
automatically shut down after a
set period. The 'safety switch
off' led will flash on the function
panel.
If the iron is left unattended in
the horizontal position it will shut
down after 30 seconds.
If it is left in the vertical position
it will shut down after 8 minutes.
To reactivate the iron gently
shake it and wait for the iron to
heat-up as normal.
Life long anti-scale
system
The life long anti-scale system
reduces scale deposits and
helps prolong the life of the iron.

MAINTENANCE

Jet cleaning
Your iron has a built in cleaning
system designed to keep the
water valve, steam chamber and
steam vents clear of lint and
loose mineral deposits. The 'jet
clean' should be operated after
each period of ironing.
Ireland Helpline 1800 409 119