Allegro ASEK37601 User Manual

Introduction
This quick guide documents the use of the ASEK37601 daugh-
terboard (TED-0003717) and ASEK-20 (Part #850540-004)
with the Allegro ACS37601 Samples Programmer. ASEK37601
daughterboard layout and 3D view can be seen in Figure 1
and 2. See the Appendix section for the ASEK37601 Daugh-
terboard Schematic.
Figure 1: ASEK37601 Top and Bottom Layers
Figure 2: ASEK37601 3D view
ASEK37601-UM, Rev. 1
MCO-0001272
Using Allegro ASEK37601 Daughterboard
with ACS37601 Samples Programmer GUI
Downloading the Programmer GUI
1. Register for software on the Allegro Software Portal:
https://registration.allegromicro.com/login.
2. Ensure that the ASEK-20 being used has the most recent
firmware downloaded. Refer to the ASEK-20 firmware
webpage (https://registration.allegromicro.com/parts/
ASEK-20#/parts/ASEK-20) and the ASEK-20 quick
guide under "Support Files" on the ASEK-20 firmware
webpage.
3. After registering and logging in to the software portal,
the dashboard page will be shown. Choose the "Find a
Part" button.
4. Search for "ACS37601" in the "Select by Part Number"
search bar shown in Figure 3.
5. Click "View" next to the ACS37601 search result.
6. Click "Download" to save the Programming Application
ZIP file.
7. Extract downloaded ZIP file to a known location.
8. Go to the extracted folder and launch "Allegro ACS37601
Samples Programmer.exe" application file.
User Manual
Figure 3
Figure 4
March 21, 2023