Table of Contents
Advertisement
Available languages
Available languages
FP48959MEE-Rev1(BlenderOnly)
26/4/06
fl
fi
‡
›
‹
¤
⁄
‚
Your hand blender is designed to help you prepare
everything from soups to chocolate mousse and
crush ice quickly.
The hand blender can be used with the measuring
jug or a saucepan.
A
B
4
5
3
6
2
7
1
8
www.morphyrichards.com
4
4:28 pm
Page 4
Features
⁄ Blender leg
¤ Release button
‹ Blender body
› Turbo switch
fi On/off switch
fl Speed control
‡ Wall mounting bracket
·
· Wall mounting screw and
wall plug x2
‚ Measuring jug with storage lid
Unpacking your hand
blender
WARNING: Carefully unpack your
hand blender, blades are very
sharp.
Wash all parts, with the exception of
the blender body, before first use.
See cleaning instructions page 5.
Assembling the
blender leg
Insert by pushing the blender leg into
the blender body, until it clicks into
place.
To remove the blender leg press the
release button.
Using the hand blender
WARNING: Make sure that the
hand blender is switched off and
unplugged from the mains.
1
Clean the blender attachment before
using it for the first time with a damp
cloth.
2
Insert the blender leg into the main
housing and click into place A.
3
The hand blender can now be
plugged in and is ready to use.
4
Place the blender leg into the food to
blend, select the required speed for
your food on the speed control, then
press the on/off button B.
Release the on/off to stop blending.
5
After use, unplug the blender and
remove the blender leg by pressing
the release button and pull gently
away.
6
Give the blender leg a rinse with cold
water. If the main body has been
splashed just give it a wipe with a
damp cloth.
Trouble shooting
WARNING: Your hand blender is
designed for intermittent use.
Check the plug is in its socket and
Do not use non-stop for more
the switch is in the 'on' position.
than 1 minute. Allow to cool
down for a minimum of 5
Is the plug itself or the socket
minutes before further use.
faulty? Check this by plugging in
another appliance.
Using for Ice crushing
•
Appliance gets very hot.
Blender has been used continuously
The blender leg is fitted with a
for too long.
special blade suitable for crushing
Leave the appliance to cool.
ice. It can be used to crush ice
cubes to produce fine ice for
•
Appliance not working.
cocktails, cold drinks etc.
The removable blender leg has not
been fitted correctly.
1
Place a maximum of 4 ice cubes in
Detach the attachment and replace
the plastic measuring beaker.
as described in 'Assembly'.
2
Press firmly down on the ice cubes
with the blender using a plunging
action until the ice cubes are fine
Wall mounting bracket
ice.
Top tips
The hand blender can be wall
mounted for convenient storage C.
•
When processing foods with strong
colour (eg. carrots) the plastic parts
WARNING: Always ensure you
of the appliance may become
are not drilling into the wall
discoloured. Wipe with cooking oil
adjacent to any electrical wires
to clean any discoloured parts.
or pipes such as water or gas.
•
For blending, select a slow speed
for soft ingredients, increase the
1
Find a suitable position on the wall
speed to produce the consistency
or cupboard where the blender is to
required.
be positioned.
•
Select a high speed for blending
2
Mark the fixing points through the
hard ingredients.
bracket.
•
When blending, start the process by
3
If you are fixing to a solid brick or
plunging the blender into the
block wall use a suitable size
ingredients. This will ensure all the
masonary drill and drill to a depth of
ingredients are pulled into the blade
25mm.
to be processed. Continue this
4
If fixing to a wood or cupboard
movement until the mixture is to the
surface, drill a 2mm pilot hole or
desired consistency.
use a bradawl.
•
Do not lift the blender head out of
the mixture as splashing may occur.
DEDICATED HELPLINE
Cleaning
For UK customers
If you have any difficulty with your
Before cleaning and maintenance,
appliance, do not hesitate to call.
switch the appliance off and unplug
We are more likely to be able to
it.
help than the store from where you
bought it.
WARNING: Handle the blades
with care as they are sharp.
Please have the following
information ready to enable our staff
Clean the main housing with a
to deal with your enquiry quickly:
damp cloth and dry all the parts
thoroughly.
•
Name of the product
•
Model number as shown on the
WARNING: Never immerse main
underside of the appliance or rating
housing in water or any other
plate
liquid.
•
Serial number
www.morphyrichards.com
g
C
5
Advertisement
Table of Contents
