Eaton AbleEdge How To Connect

How to connect Eaton's AbleEdge
Smart Breaker with the AbleEdge
Installer app
Install Smart Circuit Breaker
The purpose of this app is intended for installers/
contractors to commission the smart breaker to the
Wi-Fi network and connect it to a third-party organization
(i.e. a third party Energy Storage System).
Step 1B
Account setup
Welcome and
press "Join an
Organization"
Note: An
organization
is who you are
installing on
behalf of and
you can not
move forward
without an
organization.
Ensure that the smart circuit
breaker is installed into the
loadcenter and powered up.
Refer to the instructions in
the box or the installation
video. Always use a qualified
electrician to install and wire
the smart circuit breaker.
Enter invitation Press "Join
code and press Organization"
"Submit"
Note: Your
organization
will need
to provide
you with an
invitation code.
Once code
is accepted
you can join
organization.
Step 1A
Create an account
Step 1C
Create a new site
Press "Create a Add the site
New Site" name (required),
description and
site location
where the
smart breaker
is installed and
press "Next"
Download the AbleEdge Installer
app on the Apple App Store
or Google Play Store.
Create an account and
verify it with an active
email address.
Log in at the home page.
Press "Add Choose a
a New unique name
Loadcenter" for your
loadcenter and
press "Next"