Electrical Requirements; Instructions For Use - Morphy Richards ELITE STEAM GENERATOR - REV 1 Manual

St gen rn42277M rev 1
• To prevent damage to the textile being
ironed, follow the temperature guide
carefully. (Test the inside of the hem of the
garment).
• When ironing is complete, remove the
plug from the socket, empty any
remaining water from the tank, and allow
to cool before storage.
• If you drop or severely knock your steam
generator this could cause internal
damage even if the outside appears
alright. Have it checked by a qualified
electrician.
• The temperature of accessible surfaces
may be high when the appliance is
operating.

Instructions for use

Temperature guide
Heat setting markings on the adjustable control dial of all Morphy Richards irons match
those of the International Textile Care Labelling Code.
Symbol
Do not iron
Control knob
at all
positions
Fabric
Ironing
Steaming
10/4/03 10:05 PM
(120˚C Max) Cool
Nylon, Acetates
e.g. Acrilan
Courtelle, Orlon
Triacetates, e.g.
Tricel/Polyester
Iron on wrong side
if moisture required
use damp cloth
(Not Acetate)
3
Page 4

Electrical requirements

Check that the voltage on the rating plate
of your appliance corresponds with your
house electricity supply which must be A.C.
(Alternating current).
For appliances with fitted plug.
If the socket outlets in your home are not
suitable for the plug supplied with this
appliance the plug should be removed and
the appropriate one fitted.
WARNING : The plug removed from the
mains lead, if severed, must be destroyed
as a plug with a bared flexible cord is
hazardous if engaged into a live socket
outlet.
Should the fuse in the 13 amp plug
require changing a 13 amp BS1362 fuse
must be fitted.
WARNING: THIS APPLIANCE MUST BE
EARTHED.
(160˚C Max) Warm (210˚C Max) Hot
Cotton, Linen
Wool, Polyester
Rayon, Rayon
mixtures e.g.
mixtures,
Polyester/Cotton
e.g. Rayon/Linen
Fabrics requiring this
setting usually require
steam pressing for heavy
cotton, denim etc.