Download Print this page

Red Arrow VANMX/15 Installation Instructions

Vanguard maxi emergency bulkhead (/st version with self test)

Advertisement

Quick Links

Safety Warning
The installation should be carried out
by a qualified electrician in compliance
with the current edition of the IEE
Wiring Regulations.
Prior to installation, carry out the
necessary risk assessment considering
the people who could be at risk,
the level of risk and the precautions
required to control the risk
Ensure that the circuit supply is
isolated either by the circuit supply
fuse being removed or the applicable
Specification
Box Contents -
1 x Non-Maintained 230V Emergency Bulkhead, /ST Version with Self
Test Functionality
Dimensions:
L: 321 x W: 167 x D: 83mm
Body: ABS
Material:
Lens: Polycarbonate
Colour
6500K
Temperature:
LED Lifetime:
L70B50 36,000 Hrs
IP Rating:
IP66
IK Rating:
IK08
Working
0°C to 45°C
Temperature:
Guarantee:
5 Years
5
10
YR
WATT
GUARANTEE
Installation Instructions
1.
Isolate the mains supply before carrying out any installation or maintenance work.
2.
Remove the diffuser/lens from the fitting by loosening the 4 x screws. Release the safety cord
3.
Drill out the preferred fixing points and cable entry point. There are cable entries on the back and at either end of the body. Fix the body in the body in the
desired location, passing the supply cable through the cable entry point. Ensure that a suitable cable gland is used to maintain the IP66 rating.
2
x4
INSTALLATION INSTRUCTIONS
Vanguard Maxi Emergency Bulkhead (/ST Version with Self Test)
Product Codes: VANMX/15 & VANMX/15/ST
IP66
6500K
circuit breaker being turned off before
installation or any maintenance.
Check the total load on the circuit
ensuring the luminaire does not exceed
the rating of the circuit cable, fuse or
circuit breaker.
Long-term use and voltage fluctuations
can reduce the life span of the fitting.
If the fitting incorporates control gear,
ensure careful sizing to avoid instances
of nuisance tripping of the protective
device used in the installation.
LED
230V
3
Rear Cable Entry
Follow the provided installation
instructions, using the fixings supplied
or recommended.
Keep out of reach of children.
L321mm
SELF TEST
(Self Test Version Only)
End Cable Entry

Advertisement

loading
Need help?

Need help?

Do you have a question about the VANMX/15 and is the answer not in the manual?

Questions and answers

Summary of Contents for Red Arrow VANMX/15

  • Page 1 INSTALLATION INSTRUCTIONS Vanguard Maxi Emergency Bulkhead (/ST Version with Self Test) Product Codes: VANMX/15 & VANMX/15/ST Safety Warning • • The installation should be carried out circuit breaker being turned off before Follow the provided installation by a qualified electrician in compliance installation or any maintenance.
  • Page 2 Jumper Switch-H-1500lm Self Test Version Only VANMX/15/ST features stand alone automatic self test operation. After the power supply has been connected and the batteries have charged for 24 hours, the fitting will perform the following tests automatically, which meet and exceed legal requirements. The status during and after the tests is provided by a bi-colour LED Indicator...
  • Page 3 When this fitting comes to the end of it’s life or you choose to replace it, please do not dispose of it with your normal waste. Please recycle where the facilities exist, check with your local authority for suitable options. INS_EMERGENCY_0023_VANMX_V1 Red Arrow Electrical Ltd T: 0800 195 0006 redarrowelectrical.co.uk Cortonwood Drive, Brampton, sales@redarrowelectrical.co.uk...
  • Page 4 Result / Signed Date Signed Date Signed Date Action Action Action Functional Functional Functional Functional Functional Functional Functional Functional Functional Functional Functional Full Duration INS/EMERGENCY_TESTING_SHEET/V2 Red Arrow Electrical Ltd T: 0800 195 0006 redarrowelectrical.co.uk Cortonwood Drive, Brampton, sales@redarrowelectrical.co.uk Barnsley, S73 0UF...

This manual is also suitable for:

Vanmx/15/st