Advertisement
INSTALLATION AND CARE GUIDE
READ ALL INSTRUCTIONS BEFORE UNPACKING THE PRODUCT
INSTRUCTIONS THAT, IF IGNORED COULD RESULT IN DEATH OR SERIOUS INJURY CAUSED BY INCORRECT HANDLING
OR INSTALLATION OF THE PRODUCT. THESE INSTRUCTIONS MUST BE OBSERVED FOR SAFE INSTALLATION.
Limited warrantyis void on any commercial installation
We are not responsible for local code compliance for this product. Buildingand plumbing codes may vary from state-to-state
Under no circumstances we are shall not be liable for any and all incidental damages sustained in connection with this product.
Under no circumstances, we shall not beliable for any and all fees cost of installation/reinstallation/removal, subsequent dama ge
or transportation in case of the product defect.
WOODEN BATHTUB
Model:WB1013
2 PEOPLE ARE REQUIRED TO LIFT AND DURING
ENTIRE INSTALLATION OF THIS PRODUCT
Or Email: help@woodbridgebath.com
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Woodbridge WB1013
Summary of Contents for Woodbridge WB1013
- Page 1 INSTALLATION AND CARE GUIDE WOODEN BATHTUB Model:WB1013 READ ALL INSTRUCTIONS BEFORE UNPACKING THE PRODUCT INSTRUCTIONS THAT, IF IGNORED COULD RESULT IN DEATH OR SERIOUS INJURY CAUSED BY INCORRECT HANDLING OR INSTALLATION OF THE PRODUCT. THESE INSTRUCTIONS MUST BE OBSERVED FOR SAFE INSTALLATION.
-
Page 2: Parts Included
Matching Seat × 1 Pillow × 1 Chrome Pop-up Drain × 1 67" 20-1/2" 23-5/8" 59-3/4" 1-5/8" 6-3/4" 26" 31-7/8" Product Details: Model: WB1013 61" 67" Size: (L)67" × (W)31-7/8" × (H)23-5/8" 31-7/8" Capacity: 1 person Material: Rubber Wood 20-1/2" 23-5/8" 25-3/4" 28-3/4"... - Page 3 TOOLS REQUIRED FOR INSTALLATION (NOT INCLUDED) OTHER TOOLS MAY BE REQUIRED Soft Cloth Silicone Tape Pencil/Marker Hammer or Blanket Measure Adjustable Channel Safety Glass Knife Level Caulk Gun Wrench Lock Pliers Inspect the bathtub for any damages. lf any damage is found please contact your retailer. Carefully, remove the tub from it’s crate/box.
-
Page 4: Freestanding Installation
FREESTANDING INSTALLATION 1. Clean, level and prepare the floor for installation, Place the tub in the exact installed location on the floor and trace the outline of the bathtub with pencil and mark the drain hole location on the floor. Move the tub away so that the plumbing can be installed. - Page 5 pop up cover drain body rubber drain gasket rubber drain gasket brass nut tail piece (provided by installer) trap adapter floor drain pipe (provided by installer) trap (provided by installer) P-trap 5. Flip the tub over and carefully set the tub into position with tail piece assembly to P-trap and connect to the drain.
- Page 6 You may consider following option. Optional flexible drain hose from plumbing hardware or home improvement store may be used (Woodbridge will not supply this flexible hose). Connect one end attaches to the bathtub drain and the other end needs to be attached to the floor drain by using a transition piece.
- Page 7 3. Measure the actual distance from drain into drain pipe (not provided) on floor and the drain pipe should extend approximately 1" above the finish floor. Use a drain adapter (not provided) if necessary. Floor surface 4. Clean the surrounding of the drain pipe with cloth in preparation of setting the drain, the area should be dry and free of any debris.
-
Page 8: Important Safety Rules
Abrasive sponges or cloth. Never use steel, wool, or wired brushes that will permanently scratch the surface. Retain these installation instructions for future reference! Thank you for using WOODBRIDGE products! Please don't hesitate to contact us if you have any questions or concerns.
Need help?
Do you have a question about the WB1013 and is the answer not in the manual?
Questions and answers