Page 1
The current levels shown above are for the 440Hz Continuous tone @ nominal input voltage. Nominal current at nominal voltage. Table 1: Electrical Ratings. European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880 Document No. D190-00-301-IS Issue 6...
Page 2
D1xC2X05-AC115-A/ Class I Div 1 ABCD T5 Ta -55°C to +50°C D1xC1X05-AC230-A/ D1xC2X05-AC230-A/ European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880 Document No. D190-00-301-IS Issue 5 01-10-2024 Sheet 2 of 10...
Page 3
Temperature Classification for Gas Applications n-Hexane Methyl Ethyl Ketone Methanol 2-Nitropropane Toluene European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880 Document No. D190-00-301-IS Issue 6 30-01-2025 Sheet 3 of 10...
Page 4
Only the explosionproof cover is to be used for access to the enclosure for installation, service and maintenance. European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880 Document No. D190-00-301-IS Issue 6...
The external earth crimp ring should be located between the two M5 plain washers provided and securely locked European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880 Document No. D190-00-301-IS Issue 6...
Page 6
See Table 1 for product power supply and Sound Pressure Levels (SPL). (default) Figure 7b D1xC2: AC PCBA . European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880 Document No. D190-00-301-IS Issue 6 30-01-2025...
Page 7
AC Flash Settings (Flip-Flop Mode not available on D1xC1X05 / D1xC2X05) Figure 9: AC & DC Flash Rate Settings European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880 Document No. D190-00-301-IS Issue 6...
For monitoring voltage, the installer should allow for system cabling and voltage drops European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880 Document No. D190-00-301-IS Issue 6 30-01-2025...
Page 9
PFD (hazardous failure) 2.4 x 10 Proof Test Interval Up to 1 year European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880 Document No. D190-00-301-IS Issue 6 30-01-2025 Sheet 9 of 10...
Page 10
220- 240V ac 50/60Hz 121mA P2/P3: 78/167mA P2/P3: 199/288mA P2/P3: 199/362mA @ 240Vac 60Hz European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880 Document No. D190-00-301-IS Issue 6 30-01-2025 Sheet 10 of 10...
Page 11
On-axis light output rating per UL1638 (Clear Lens only) Model Voltage Intensity (cd eff.) at 1Hz flash rate D1xC1X05-DC024-A / D1xC2X05-DC024-A 20Vdc D1xC1X10-DC024-A / D1xC2X10-DC024-A E2S Warning Signals Impress House, Mansell Road, Acton, London W3 7QH sales@e2s.com e2s.com D190-00-001-IS-UL Issue B 27/10/2021...
Page 12
Characteristics for Canadian Fire CAN/ULC-S525 (P3) OSPL Horizontal Axis Vertical Axis -3dB(A) +46° / -48° +46° / -47° -6dB(A) +52° / -54° +52° / -53° E2S Warning Signals Impress House, Mansell Road, Acton, London W3 7QH sales@e2s.com e2s.com D190-00-301-IS-UL Issue B 27/10/2021...
Notified Body No.: 2813 quality assurance of the production process (Module D): Unit 6, Hawarden Industrial Park, Hawarden, Deeside, CH5 3US, UK Quality Assurance Notification (Module D): SIRA 05 ATEX M342 Provisions fulfilled by the equipment: II 2G Ex db IIC T6…T3 GB II 2D Ex tb IIIC T82 ̊ C …145 ̊ C Db Standards applied: EN 60079‐0:2018 EN 60079‐1:2014 EN60079‐31:2014 Directive 2014/30/EU: Electromagnetic Compatibility Directive (EMC) Standards applied: EN 61000‐6‐1:2007 EN 61000‐6‐2:2005 EN 61000‐6‐3:2007 / A1:2011 / AC: 2012 EN 61000‐6‐4:2007 / A1: 2011 Directive 2014/35/EU: Low Voltage Directive (LVD) Standards applied: EN 60947‐1:2007 + A2:2014 Directive 2011/65/EU: Restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) The product and all the components contained within it are in accordance with the restriction of the use of hazardous substances in electrical and electronic equipment, including amendment by Directive 2015/863/EU. Regulation (EC) 1907/2006: Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) The product and all the components contained within it are free from substances of very high concern. Other Standards and Regulations EN 60529:1992+A2:2013 ‐ Degrees of protection provided by enclosures (IP code) – enclosure rated IP66 E2S Telephone: +44 (0)20 8743 8880 Fax: +44 (0)20 8740 4200 Email: sales@e2s.com www.e2s.com DC‐067_Issue_H (D1x).docx ‐ Page 1 of 2 ‐ QAF_252_Issue_5...
Page 23
EU Declaration of Conformity On behalf of European Safety Systems Ltd., I declare that, on the date the equipment accompanied by this declaration is placed on the market, the equipment conforms with all technical and regulatory requirements of the above listed directives, regulations and standards. This Declaration is issued under the sole responsibility of the manufacturer. Martin Streetz Document No.: DC‐067_Issue_H Quality Assurance Manager Date and Place of Issue: London, 10/02/2022 E2S Telephone: +44 (0)20 8743 8880 Fax: +44 (0)20 8740 4200 Email: sales@e2s.com www.e2s.com DC‐067_Issue_H (D1x).docx ‐ Page 2 of 2 ‐ QAF_252_Issue_5...
Page 24
Notified Body No.: 0518 quality assurance of the production process (Module D): Rake Lane, Eccleston, Chester CH4 9JN, UK Quality Assurance Notification (Module D): CSAE 22UKQAN0046 Provisions fulfilled by the equipment: II 2G Ex db IIC T6…T3 GB II 2D Ex tb IIIC T82 ̊ C …145 ̊ C Db Standards applied: EN 60079‐0:2018 EN 60079‐1:2014 EN60079‐31:2014 Directive 2014/30/EU: Electromagnetic Compatibility Directive (EMC) Standards applied: EN 61000‐6‐1:2007 EN 61000‐6‐2:2005 EN 61000‐6‐3:2007 / A1:2011 / AC: 2012 EN 61000‐6‐4:2007 / A1: 2011 Directive 2014/35/EU: Low Voltage Directive (LVD) Standards applied: EN 60947‐1:2007 + A2:2014 Directive 2011/65/EU: Restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) The product and all the components contained within it are in accordance with the restriction of the use of hazardous substances in electrical and electronic equipment, including amendment by Directive 2015/863/EU. Regulation (EC) 1907/2006: Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) The product and all the components contained within it are free from substances of very high concern. Other Standards and Regulations EN 60529:1992+A2:2013 ‐ Degrees of protection provided by enclosures (IP code) – enclosure rated IP66 E2S Telephone: +44 (0)20 8743 8880 Fax: +44 (0)20 8740 4200 Email: sales@e2s.com www.e2s.com DC‐097_Issue_A (D1x UKCA).docx ‐ Page 1 of 2 ‐ QAF_252_Issue_5...
Page 25
UKCA Declaration of Conformity On behalf of European Safety Systems Ltd., I declare that, on the date the equipment accompanied by this declaration is placed on the market, the equipment conforms with all technical and regulatory requirements of the above listed directives, regulations and standards. This Declaration is issued under the sole responsibility of the manufacturer. Martin Streetz Document No.: DC‐097_Issue_A Quality Assurance Manager Date and Place of Issue: London, 24/02/2022 E2S Telephone: +44 (0)20 8743 8880 Fax: +44 (0)20 8740 4200 Email: sales@e2s.com www.e2s.com DC‐097_Issue_A (D1x UKCA).docx ‐ Page 2 of 2 ‐ QAF_252_Issue_5...
Need help?
Do you have a question about the D1xC2 Series and is the answer not in the manual?
Questions and answers