Asus GC33 Quick Start Manual

Revised Edition V3 / October 2024
E25273_GC33_UM_V3_8pages.indd 1-4 E25273_GC33_UM_V3_8pages.indd 1-4
E25273
ROG XG Mobile Setup Guide
Front View
Rear View
Kickstand
More info:
Top View
Air vents
Left View (with ROG XG Mobile connector)
Air vents
Status indicator
Release clips
Unlock switch
Status indicator
Right View
DisplayPort
Power connector
LAN port
HDMI output port
Getting started
Memory card reader
IMPORTANT! Follow the instructions and ensure to save all data and stop applications that are
using the current GPU before switching the GPUs.
NOTE: For more information on devices supporting the ROG XG Mobile, please visit the ROG
official website.
Connect your ROG XG Mobile
Air vents
1. Plug the bundled AC power cord into the power connector of your ROG XG Mobile.
2. Plug your ROG XG Mobile into a 100V~240V power source.
3. Plug the ROG XG Mobile connector into your Notebook PC's ROG XG Mobile interface
and USB Type-C® combo port.
4. Once you see the status indicator on the ROG XG Mobile connector turns white, push
the unlock switch to
5. In the pop-up Settings window, activate the ROG XG Mobile. The status indicator turns
red when the activation is complete.
USB 3.2 Gen 2 Type-C® port
USB 3.2 Gen 2 port
to lock the connector.
10/21/2024 3:43:19 PM 10/21/2024 3:43:19 PM