Eagle Group WR1840C Assembly Instructions

PART #A223752
INSPECT CONTENTS IMMEDIATELY AND FILE CLAIM WITH DELIVERING CARRIER FOR ANY DAMAGE
YOU ARE RESPONSIBLE FOR DAMAGE TO YOUR UNIT IF RETURNED IMPROPERLY PACKED.
Installation is easier if all posts are marked first to indicate desired shelf locations. Lay posts on floor, with top or bottom of
posts against a wall or straight edge. Mark all posts, using a magic marker or grease pencil.
Step 2 - Attach split sleeves
(for bottom shelf) to posts.
• The wider part of the taper goes
toward the bottom.
• Make sure rib on split sleeve is
seated into a groove on the post.
Note: The number covered by the
split sleeve indicates approximate
height of shelf.
6
5
split
sleeves
Eagle Foodservice Equipment, Eagle MHC, SpecFAB
Kitchen Wine Cart
ASSEMBLY INSTRUCTIONS
SAVE YOUR BOX AND ALL PACKING MATERIALS.
HELPFUL SUGGESTION:
Step 1 - Assemble casters to posts.
Drive in caster using a hammer
or mallet. Several solid blows
are usually required.
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com
• Phone: 302/653-3000 • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: 302/653-2065
® , and Retail Display are divisions of Eagle Group. ©2008 by the Eagle Group
CAUTION
caster
stem
bottom of post
post
bottom
shelf
Step 3 - Mount bottom shelf.
corner
collar
post
split
sleeve
(continued on back page)
EG10098 Revised 12/08
.