Download Print this page

Eagle Group TSSP1436Z Assembly Instructions

Sandwich prep station

Advertisement

Quick Links

INSTRUCTION SHEET
#A223915
INSPECT CONTENTS IMMEDIATELY AND FILE CLAIM WITH DELIVERING
CARRIER FOR ANY DAMAGE. SAVE YOUR BOX AND ALL PACKING MATERIALS.
YOU ARE RESPONSIBLE FOR DAMAGE TO YOUR UNIT IF RETURNED IMPROPERLY PACKED.
Step 1 - Assemble bottom frame supports to 18˝ posts.
Snap split sleeves onto posts at desired height.
• The wider part of the taper goes toward the bottom.
• Make sure rib on split sleeve is seated into a groove on the post.
split
sleeve
Slide collar of frame
collar
support over post
and down onto
18˝ post
split sleeves.
Repeat with
split
remaining 18˝ post.
sleeve
IMPORTANT: Do NOT
assemble top frame
supports to posts yet.
Step 3 - Attach 3-sided channel frame to 74˝ posts.
Eagle Foodservice Equipment, Eagle MHC, and SpecFAB
Sandwich Prep Station
ASSEMBLY INSTRUCTIONS
CAUTION
18˝ post
bottom frame
support
split sleeve
split
sleeve
3-sided
channel
frame
74˝ post
(front)
split
sleeve
74˝ post
(rear)
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A.
• Phone: 302/653-3000 • 800/441-8440 • Fax: 302/653-2065
• www.eaglegrp.com • www.eaglegrpnews.com • www.eaglemhc.com
Step 2 - Attach assemblies to two of
the four 74˝ posts.
split
sleeve
74˝ posts
are divisions of Eagle Group. ©2023 by the Eagle Group
®
74˝ post
74˝
post
frame support/
frame
post assembly
support/
post
assembly
split
sleeve
3-sided
channel
frame
(continued on page 2)
EG10038
Revised 09/23

Advertisement

loading
Need help?

Need help?

Do you have a question about the TSSP1436Z and is the answer not in the manual?

Questions and answers

Summary of Contents for Eagle Group TSSP1436Z

  • Page 1 • 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • Phone: 302/653-3000 • 800/441-8440 • Fax: 302/653-2065 • www.eaglegrp.com • www.eaglegrpnews.com • www.eaglemhc.com Eagle Foodservice Equipment, Eagle MHC, and SpecFAB are divisions of Eagle Group. ©2023 by the Eagle Group ®...
  • Page 2 Sandwich Prep Station ASSEMBLY INSTRUCTIONS Step 4 - Attach top frame supports. Step 5 - Attach bottom grid panel clamps onto post groove #34. 74˝ posts split sleeve split sleeve grid panel clamp top frame support 3-sided top frame channel supports frame split sleeve...
  • Page 3 Sandwich Prep Station ASSEMBLY INSTRUCTIONS Step 8 - Repeat Step 5 to attach top grid panel clamps onto post groove #64. split sleeve grid panel clamp grid panel clamps (bottom) split sleeve 74˝ post Step 9 - Repeat Step 6 to install remaining wire shelf onto post groove #66. top wire shelf split sleeve...
  • Page 4 • 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • Phone: 302/653-3000 • 800/441-8440 • Fax: 302/653-2065 • www.eaglegrp.com • www.eaglegrpnews.com • www.eaglemhc.com Eagle Foodservice Equipment, Eagle MHC, and SpecFAB are divisions of Eagle Group. ©2023 by the Eagle Group ®...