Page 1
Electric Log Splitter Hercules HPS300 User Manual [Revision 1.0 November 2017] READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND MAY VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by this manual may vary in appearance, assembly, inclusions, specifications, description and packaging.
Electric Log Splitter - Hercules HPS300 Safety If used correctly, the machine is a powerful, high performance tool. If used improperly or without due precaution, it may represent a hazard. For safe operation, always comply strictly with the safety rules that follow, as well as those found throughout this manual.
Electric Log Splitter - Hercules HPS300 Parts Identification Figure 1 Name Name Work Table Ram Control Lever Motor Wheels Pump Hydraulic Ram Hydraulic Ram High Pressure Hoses Oil Tank Drag Handle Motor Switch Box Log Supports / Screws ON / OFF Switch...
Electric Log Splitter - Hercules HPS300 Set-Up Refer to Figures 1, 2 and 3. DO NOT ADJUST THE PRESSURE LIMITING SCREW - Maximum pressure is set at the factory and the adjustment screw sealed to prevent over-pressure in the hydraulic system. Unauthorized adjustment of the pressure limiting screw may cause the hydraulic pump or other components to fail and will void warranty..
Electric Log Splitter - Hercules HPS300 Operation Refer to Figures 1 and 4. 1. Loosen the oil filler/air bleed screw (8) 2 to 3 turns. This allows air in and out of the oil tank as the ram moves. If the air bleed is not opened, the ram may attempt to return from an extended position due to a vacuum effect in the oil tank.
Electric Log Splitter - Hercules HPS300 Maintenance The following procedures should be performed as and when necessary. Often, a reduction in machine performance indicates that one or more maintenance procedures is required – refer to the Troubleshooting section for additional information.
Electric Log Splitter - Hercules HPS300 Troubleshooting The following information may assist in identifying a problem and rectifying it. Note: Some procedures listed here may need to be performed by a qualified service technician. Malfunction Analysis Solution Motor not starting...
Need help?
Do you have a question about the Hercules HPS300 and is the answer not in the manual?
Questions and answers