Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Electrolux KGG643753W
Summary of Contents for Electrolux KGG643753W
- Page 1 EN User Manual | Hob KGG643753K KGG643753W...
-
Page 2: Table Of Contents
Welcome to Electrolux! Thank you for choosing our appliance. Get usage advice, brochures, trouble shooter, service and repair information: www.electrolux.com/support Subject to change without notice. CONTENTS 1. SAFETY INFORMATION................2 2. SAFETY INSTRUCTIONS................5 3. INSTALLATION....................7 4. PRODUCT DESCRIPTION................12 5. -
Page 3: General Safety
• Keep all packaging away from children and dispose of it appropriately. • WARNING: The appliance and its accessible parts become hot during use. Keep children and pets away from the appliance when in use and when cooling down. • If the appliance has a child safety device, it should be activated. - Page 4 • Do not use the appliance before installing it in the built-in structure. • Do not use a steam cleaner to clean the appliance. • If the glass ceramic surface / glass surface is cracked, switch off the appliance and unplug it from the mains. In case the appliance is connected to the mains directly using junction box, remove the fuse to disconnect the appliance from power supply.
-
Page 5: Safety Instructions
2. SAFETY INSTRUCTIONS • Before carrying out any operation make This appliance is suitable for the following sure that the appliance is disconnected markets: UA from the power supply. • Make sure that the parameters on the 2.1 Installation rating plate are compatible with the electrical ratings of the mains power supply. -
Page 6: Gas Connection
2.3 Gas connection • Make sure that the ventilation openings are not blocked. • Do not let the appliance stay unattended CAUTION! during operation. When using a gas cylinder, always keep • Set the cooking zone to “off” after each it on a flat horizontal surface (with the use. -
Page 7: Installation
have to move them on the cooking • Switch off the appliance and let it cool surface. down before cleaning. • To prevent spills, use only stable • Do not use water spray and steam to cookware with the correct shape and clean the appliance. -
Page 8: Injectors Replacement
3.2 Gas Connection The flexible pipe is prepared for apply when: • it can not get hot more than room WARNING! temperature, higher than 30°C; • it is no longer than 1500 mm; The following instructions about • it shows no throttles; installation, connection and maintenance •... -
Page 9: Adjustment Of Minimum Level
3.4 Conversion to G20 13 mbar 3. Ignite the shaft manually without the knob. 4. Turn the shaft on the minimum position. 5. With a thin screwdriver, adjust the bypass For the G20 13 mbar conversion please screw position (A). contact our Authorised Service Centre. -
Page 10: Connection Cable
WARNING! Make sure the flame does not go out when you quickly turn the knob from the maximum position to the minimum position. 3.6 Electrical connection • Make sure that the rated voltage and type of power on the rating plate agree with the voltage and the power of the local power 1. -
Page 11: Possibilities For Insertion
min. min. 650 mm 100 mm min. 55 mm 30 mm 480 mm 560 mm CAUTION! Install the appliance only on a worktop with flat surface. 3.9 Installing hob under the hood If you install the hob under a hood, please see the installation instructions of the hood for the minimum distance between the appliances. -
Page 12: Product Description
4. PRODUCT DESCRIPTION 4.1 Cooking surface layout Semi-rapid burner Ultra Rapid burner Auxiliary burner Control panel Control knobs Window for Hob²Hood infrared signal 4.2 Control panel layout Use the sensor fields to operate the Minute Minder and Hob²Hood. The displays, indicators and sounds tell which functions operate. -
Page 13: Control Knob
Stand-by mode: Press the for at least 1 second to activate the display. 4.3 Control knob Symbol Description Symbol Description minimum gas supply no gas supply / off position 1 - 9 power levels ignition position / maximum gas supply 4.4 Residual heat LEDs full light LEDs light slowly reduced... -
Page 14: Daily Use
5. DAILY USE 2. Keep the control knob pushed for equal WARNING! or less than 10 seconds. This lets the thermocouple warm up. If not, the gas Refer to Safety chapters. supply is interrupted. 3. Adjust the flame after it is regular. 5.1 Burner overview If after some tries the burner does not light, check if the crown and its cap are in... -
Page 15: Turning The Burner Off
In the last minute the time decreases in The hob is supplied with StepPower. This seconds, and the last 10 seconds the function allows you to set the power more timer emits a sound signal. precisely from 9-1. 3. Touch WARNING! To stop the sound. -
Page 16: Hints And Tips
3. Touch to select desired automatic mode. For most of the hoods, the remote After the Automatic Mode is selected, wait till system is originally deactivated. Activate it disappears from the display so that this it before you use the function. For more setting is saved in Flash Memory and recalled information refer to the hood user at startup. -
Page 17: Suggested Recipes
• Protect the hood panel from direct work with this function refer to our consumer sunlight. website. The Electrolux cooker hoods that • Do not spot halogen light on the hood work with this function must have the symbol panel. - Page 18 Food categories Recipes Burner type Heat up phase Cooking phase power level power level 1) Mushrooms rice Large Couscous Large Pasta - Rice - other Cereals Spaghetti Large Ravioli Large Vegetable soup Medium Mushrooms and pota‐ Soup - Legumes Medium toes soup Fish soup Large...
-
Page 19: Care And Cleaning
The settings suggested in the cooking table should only serve as guidelines and be adjusted depending on the rawness of food, its weight and quantity as well as on the type of gas used and the material of the cookware used to prepare the dish. 7. -
Page 20: Troubleshooting
WARNING! Let the flame spreaders cool down before you clean them. Light stains: Wash the flame spreader with warm water and soap and dry it with a soft cloth. Medium stains: Use the dishwasher. Place the flame spreader on the bottom rack in a flat position, with the top side up. - Page 21 8.1 What to do if... Problem Possible cause Remedy There is no spark when you try to The hob is not connected to an elec‐ Check if the hob is correctly connec‐ activate the spark generator. trical supply or it is connected incor‐ ted to the electrical supply.
-
Page 22: Labels Supplied With The Accessories Bag
8.3 Labels supplied with the accessories bag Stick the adhesive labels as indicated below: MOD. MOD. MOD. TYPE PROD.NO. IP20 PROD.NO. PROD.NO. SER.NO. 0049 SER.NO SER.NO 03 IT DATA DATA MADE IN ITALY A. Stick it on Guarantee Card and send this C. - Page 23 9.3 Other technical data Gas original: G20 (2H) 20 mbar 8,5 kW TOTAL POWER: Gas replace‐ G30/G31 (3B/P) 30/30 mbar 582 g/h ment: G20 (2H) 13 mbar 8,25 kW Electric supply: 220-240 V ~ 50-60 Hz Appliance category: II2H3B/P Gas connection: G 1/2"...
-
Page 24: Energy Efficiency
10. ENERGY EFFICIENCY 10.1 Product Information according to EU Ecodesign regulation Model identification KGG643753K, KGG643753W Type of hob Built-in hob Number of gas burners Left rear - Semi-rapid 60.2% Right rear - Semi-rapid 60.1% Energy efficiency per gas burner (EE gas burner) - Page 28 867367954-E-162024...
Need help?
Do you have a question about the KGG643753W and is the answer not in the manual?
Questions and answers