Table of Contents
Advertisement
Alarm system
44n
Interior motion sensor
In order for the interior motion sensor to
function properly, the windows and
sliding/tilt sunroof must be completely
closed.
Nevertheless, you should deactivate
the interior motion sensor (refer to
"Avoiding unintentional alarms") if you
> leave children or animals in the
vehicle
> intend to leave the windows or
sliding/tilt sunroof open.
Electric power windows
To open and close windows
From ignition key position 1:
> Depress the rocker switch until you
feel resistance:
The window continues moving for as
long as you maintain pressure on the
switch
> Press the rocker switch beyond the
pressure point:
The window moves automatically.
Press the switch a second time to
stop the window.
After the ignition has been switched off:
> You can still operate the windows as
long as neither of the front doors has
been opened. To open the window,
press the switch beyond the pressure
point.
When leaving the vehicle, always
extract the ignition key from the
lock and remember to close the doors
to prevent children from operating the
power windows and injuring them-
selves,
etc.<
For the convenience mode via the door
lock or the remote control, refer to
pages
33
or 35.
Safety feature
A contact strip is integrated into the
inner side of each of the upper window
frame sections. If pressure is exerted
against this contact strip while a
window is being raised, the system will
respond by stopping the window and
then retracting it a small distance.
Online Edition for Part No. 01 41 0 156 818 - © 07/02 BMW AG
Advertisement
Table of Contents
