Table of Contents
Advertisement
Lamps and bulbs
154n
*
Xenon lamps
The operating life of these lamp units is
extremely long and the likelihood of
failure very low, provided that they are
not switched on and off an excessive
number of times. If one of these bulbs
should nevertheless fail, it is possible to
continue driving with great caution
using the fog lamps, provided traffic
laws in your area do not prohibit this.
Because of the extremely high
voltages involved, any work on the
xenon lighting system should be carried
out by technically-qualified personnel
only. Otherwise, there is a risk of fatal
injury.<
Standing lamps
10 watt bulb
The bulb holder and reflector are a
single unit and are both changed
at the same
time.<
1. Turn the bulb holder with reflector to
the left and remove
2. Disconnect the plug
3. Plug the new bulb holder into the
plug connector. Be sure that it is
securely engaged
4. Insert the reflector with bulb holder
and turn to the right as far as
possible.
Turn signal indicator/Parking
lamps (side marker lamps)
Dual-filament bulb, 21 watt
1. Turn the bulb to the left and remove
2. Remove and replace the bulb.
Online Edition for Part No. 01 41 0 156 818 - © 07/02 BMW AG
Advertisement
Table of Contents
