Komatsu GD655-5 Operation & Maintenance Manual page 64

OPERATION
FILTER, OIL REPLACEMENT TIME DISPLAY
After the system check is completed, this display (4) displays the
filter and type of oil for 30 seconds for items where the replacement
interval is close. When this happens, the maintenance caution
lamp also flashes or lights up.
If any filter or oil has been replaced, reset the replacement time.
For details, see "RESET METHOD FOR FILTER, OIL
REPLACEMENT TIME (PAGE 3-30)".
REMARK
The top line of the character display shows the name and ID number of the item needing replacement. The line
at the bottom shows the remaining time until replacement and the total number of times the item has been
replaced.
After giving the display for 30 seconds, the display does not appear again until the starting switch is turned again
to the ON position.
If the action code is being displayed, the message in the diagram above is not displayed on the character display.
If there two or more items to be displayed, they are displayed every three seconds.
If there are more than 10 items to be displayed, all the items are displayed once each.
The display is given when the time reaches 30 hours before the filter and oil replacement interval.
When the replacement interval approaches, the maintenance caution lamp flashes, and if the replacement
interval has passed, the lamp lights up.
Items for display of filter, oil replacement time
Item
Engine oil
Engine oil filter
Fuel prefilter
Fuel main filter
Hydraulic filter
Transmission oil
Transmission oil filter
Final drive case
Hydraulic oil
Circle case oil
Tandem case oil
Replacement
Character display
interval (H)
500
500
500 P FUEL FILT
1000
1000
1000
1000
1000
2000
2000 CR CASE OIL
2000 TD CASE OIL
ID number
ENGOIL
ENGFILT
FUEL FILT
HYD FILT
TM OIL
TM FILT
AXLE OIL
HYD OIL
EXPLANATION OF COMPONENTS
01
02
41
03
04
12
13
15
10
36
37
3 - 11