1. Manuals
  2. Brands
  3. Wells Manuals
  4. Griddle
  5. WG-3036G
  6. Owner's manual

Wells WG3036G Owner's Manual

Countertop gas griddles
Hide thumbs Also See for WG3036G:
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

Download this manual
Model WG2424G
FOR YOUR SAFETY
Do not store gasoline or other flammable liquids
in the vicinity of this or any other appliance.
WARNING:
Improper installation, adjustment, alteration, service or maintenance can cause
property damage, injury or death. Read the installation, operating and maintenance
instructions thoroughly before installing or servicing this equipment.
IMPORTANT:
The purchaser of this equipment must post in a prominent location instructions to be followed in the
event the user smells gas. This information shall be obtained by consulting the local gas supplier.
IMPORTANT: DO NOT DISCARD THIS MANUAL
This manual is considered to be part of the appliance and is to be given to the OWNER or
MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of
this appliance. Additional manuals are available from your WELLS DEALER.
THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR
INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any
questions concerning installation, operation or maintenance of this equipment.
2M-45324
REV P (05-23)
p/n
WELLS MANUFACTURING
265 Hobson Street, Smithville, Tennessee 37166
telephone: 800-264-7827
www.wells-mfg.com
Includes
INSTALLATION, USE & CARE
EXPLODED VIEW & PARTS LIST
WIRING DIAGRAM
OWNERS MANUAL
COUNTERTOP
GAS
GRIDDLES
MODELS
WG2424G
WG2436G
WG3036G
WG3048G
121

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WG3036G and is the answer not in the manual?

Questions and answers

Related Manuals for Wells WG3036G

Summary of Contents for Wells WG3036G

  • Page 1 Additional manuals are available from your WELLS DEALER. THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any questions concerning installation, operation or maintenance of this equipment.

  • Page 2: Limited Warranty Statement

    Wells is not liable for any unit which has been mishandled, Wells’ discretion have the parts replaced or repaired by Wells or a Wells- abused, misapplied, subjected to harsh chemicals, modified by authorized service agency.

  • Page 3: Specifications

    PARTS & SERVICE CUSTOMER SERVICE DATA INTRODUCTION Thank You for purchasing this Wells Manufacturing appliance. Proper installation, professional operation and consistent maintenance of this appliance will ensure that it gives you the very best performance and a long, economical service life.

  • Page 4: Features & Operating Controls

    FEATURES & OPERATING CONTROLS SHELF (Certain Models) GREASE TROUGH SPLASH GUARD GREASE DRAWER FRONT ACCESS PANEL GAS SAFETY VALVE THERMOSTAT ADJUSTABLE LEGS GAS CONTROL KNOB TEMPERATURE CONTROL KNOB IL1833a Fig. 1 Countertop Gas Griddle - Features & Operating Controls FRONT ACCESS PANEL Allows access to gas control valve and themerature control thermostat.

  • Page 5: Precautions And General Information

    PRECAUTIONS AND GENERAL INFORMATION WARNING: This appliance is intended for use in commercial establishments only. FIRE HAZARD This appliance is intended to prepare food for human consumption. No other use is recommended or authorized by the manufacturer or its In the event a gas odor agents.

  • Page 6: Installation

    INSTALLATION NOTE: DO NOT discard UNPACKING & INSPECTION the carton or other packing Carefully remove the griddle from the carton. Remove all materials until you have protective plastic film, packing materials and accessories from the inspected the appliance for griddle before connecting the griddle to fuel gas or otherwise hidden damage and tested it performing any installation procedure.
  • Page 7 INSTALLATION GAS APPLIANCE CODE COMPLIANCE DANGER: FIRE AND The installation of gas piping from the outlet side of the gas meter or EXPLOSION service regulator to the griddle must be performed by a technician qualified and certified or licensed to install gas-fired equipment. HAZARD A licensed and qualified technician must perform the initial startup and NEVER use an open flame to...
  • Page 8 INSTALLATION DANGER: INSTALLING THE GRIDDLE Refer to the nameplate. Verify the fuel type and pressure, which must FIRE AND match the nameplate specifications. Connecting the griddle to the EXPLOSION wrong fuel type and/or pressure will compromise the safety and/or HAZARD performance of the appliance.

  • Page 9: Gas Pipe Pressure Testing

    INSTALLATION GAS PIPE PRESSURE TESTING IMPORTANT: The main piping system must be capable of supplying the griddle with PRESSURE TESTING MUST sufficient volume/flow of fuel to satisfy the maximum operational input BE PERFORMED BY A requirements. QUALIFIED TECHNICIAN ONLY. Make sure the supply piping system has been pressure tested before the regulator and griddle are connected.

  • Page 10: Initial Adjustment

    INITIAL ADJUSTMENT IMPORTANT: PURGING AIR FROM GAS LINES Air must be purged from the gas lines for the initial startup. Turn the PRESSURE ADJUSTMENT knob on the safety valve to PILOT, press and hold until a flame can MUST BE PERFORMED BY be established at the pilot burner.

  • Page 11: Chrome Plated Griddles

    INITIAL ADJUSTMENT PREPARING THE GRIDDLE SURFACE SEASONING STANDARD GRIDDLES As manufactured, the steel surface of your Wells griddle has microscopic pores. It is important to fill these pores with oil in order to provide a hard, non-stick cooking surface. a. Preheat the griddle surface to 375ºF (191ºC).

  • Page 12: Operation

    If the knob will not turn by hand, do NOT telephone in your building. attempt to force or repair it. Contact your Authorized Wells Service Agency for repairs. Forced or improperly repaired valves In the event a gas odor pose the risk of fire and/or explosion.

  • Page 13: Hot Surface

    OPERATION USING THE GRIDDLE WARNING: FIRE AND Check the chart below for recommended cooking temperatures. Turn EXPLOSION temperature control knob to the desired temperature. HAZARD For standard griddles: • Keep the griddle surface clean and well oiled during use. If the pilot light should be extinguished, turn off the •...

  • Page 14: Burn Hazard

    CLEANING INSTRUCTIONS - STANDARD AND GROOVED GRIDDLES PREPARATION Set temperature control to 220ºF. Allow CAUTION: griddle temperature to drop to 220ºF before BURN HAZARD proceeding. FREQUENCY Daily Griddle will be hot during portions of this cleaning TOOLS Griddle Brick or Pumice Stone, Fiber Brush procedure.
  • Page 15 CLEANING INSTRUCTIONS - CHROME PLATED GRIDDLES PREPARATION Set temperature control to 220ºF. Allow CAUTION: griddle temperature to drop to 220ºF before BURN HAZARD proceeding. FREQUENCY Daily Griddle will be hot during portions of this cleaning TOOLS 4” Razor-Style Scraper, Soft Bristle Brush procedure.

  • Page 16: Troubleshooting

    Grease drawer full or not installed properly Griddle drips grease Contact Authorized Wells Service Damaged internal component Agency for repairs NOTE: There are no user serviceable components in the griddle. In all cases of damage or malfunction, contact your Authorized Wells Service Agency for repairs.

  • Page 17: Wiring Diagram

    WIRING DIAGRAM GAS VALVE THERMOSTAT THERMOPILE TH/TP IL2192 NOTE: Shown is the wiring diagram for a single burner section. Each burner section is wired identically.

  • Page 18: Exploded View And Parts List

    EXPLODED VIEW & PARTS LIST WG2424G CABINET COMPONENTS Model: WG2424G Countertop Gas Griddle: Cabinet Components Namplate location after 4/2014 PL121 IL1836 REV G (01-23)
  • Page 19 EXPLODED VIEW & PARTS LIST WG2424G FUEL SYSTEM COMPONENTS Model: WG2424G Countertop Gas Griddle: Fuel System Components PL121 IL1837 Rev. D 4/13/12...
  • Page 20 G7-45397 DEFLECT HEAT LOW WG2424G 2A-Z0314 FOOT, 4” DIE CAST 2C-33922 SCREW 6-32X1/4 PH PAN TAP G7-WL0596 PANEL CONTROL WG2424 2M-306719 LOGO WELLS DIECAST SHIELD G7-302508 DRAWER GREASE WG2424GL WS-59173 DRAWER ASSY GREASE 2R-38668 HANDLE DOOR G7-Z12047 PANEL FRONT - GREASE DRW...
  • Page 21 EXPLODED VIEW & PARTS LIST WG2436G CABINET COMPONENTS Parts noted with * indicate use in builds prior to Nov. 2022 48528 ASSEMBLY 59039* 3 places 65951* 3 places G7-Z18307 2436PS model 2C-35485 59331 2C-35485 G7-45292 G7-45278 2C-33453 2 places 59173 2C-33935 G7-45400 Upper...
  • Page 22 EXPLODED VIEW & PARTS LIST WG2436G FUEL SYSTEM COMPONENTS 2J-39007 (NAT) 2J-39284 (LP) Pre 11/15/2019: 2A-45318 Post 11/15/2019: 2A-Z22808 2A-45314 2F-45303 3 places 2C-40680 WS-65361 2P-39245 3 places 2A-45313 3 places 2A-45315 Pre 11/15/2019: 2A-45317 2C-31718 2A-45316 Post 11/15/2019: 2A-Z22807 65408 (NAT) 2R-45321...
  • Page 23 EXPLODED VIEW & PARTS LIST WG3036G CABINET COMPONENTS Parts noted with * indicate use in builds prior to Nov. 2022 2H-39039* 3 places G7-39331 G7-45952* 3 places 2C-35485 2C-35485 G7-45269 G7-45292 G7-45278 2C-33453 2 places WS-59173 2C-33935 G7-45288 G7-Z12047 G7-45399...
  • Page 24 EXPLODED VIEW & PARTS LIST WG3036G FUEL SYSTEM COMPONENTS ADJUSTABLE REGULATOR 2J-39007 (NAT) 2J-39284 (LP) REGULATOR CONVERTIBLE FOR LP OR NAT 2J-306629 Pre 11/15/2019: 2A-45318 Post 11/15/2019: 2A-Z22808 2F-45302 3 places 2C-40680 2A-45314 WS-65361 3 places 2P-39245 Pre 11/15/2019: 2A-45317...
  • Page 25 EXPLODED VIEW & PARTS LIST WG3048G CABINET COMPONENTS Parts noted with * indicate use in builds prior to Nov. 2022 2H-39039* 4 places G7-45952* G7-39331 4 places 2C-35485 2C-35485 G7-45375 G7-45278 2C-33453 2 places WS-59173 G7-Z12047 2C-33935 2R-38668 G7-45291 G7-45373 2M-300534 Model: WG3048G Countertop Gas Griddle: Cabinet Components...
  • Page 26 EXPLODED VIEW & PARTS LIST WG3048G FUEL SYSTEM COMPONENTS ADJUSTABLE REGULATOR 2J-39007 (NAT) 2J-39007 (NAT) REGULATOR CONVERTIBLE FOR LP OR NAT 2J-306629 Pre 11/15/2019: 2A-45318 Pre 11/15/2019: 2A-Z22808 2A-45314 2F-45302 2A-45315 4 places DD-60680 Pre 11/15/2019: 2A-45317 2K-Z13246 Post 11/15/2019: 2A-Z22807 WS-65361 4 places 2A-45316...
  • Page 27 NOTES...

  • Page 28: Parts And Service

    LEGS, 4”, METAL, SET OF 4 2A-Z0314 service, or to order factory SCRAPER, GROOVED GRIDDLE 5G-20651 authorized replacement parts, contact your Wells authorized KIT, CONTROL PANEL ASSY WS-WL1057 service agency, or call: Wells Manufacturing 265 Hobson St., Smithville, TN 37166 USA Service Dept.

  • Page 29: Pour Votre Sécurité

    TEURS de cet appareil. Des manuels supplémentaires sont disponibles auprès de votre DÉTAILLANT WELLS. CE MANUEL DOIT ÊTRE LU ET COMPRIS PAR TOUTES LES PERSONNES UTILISANT OU INSTALLANT CET APPAREIL. Contactez votre DÉTAILLANT WELLS si vous avez des questions concernant l’installation, le fonctionnement ou l’entretien de cet appareil. 2M-45324 Rev.

  • Page 30: Spécifications

    COORDONNÉES DU SERVICE À LA CLIENTÈLE INTRODUCTION Nous vous remercions d’avoir acheté cet appareil Wells Manufacturing. Une installation appropriée, un fonctionnement professionnel et un entretien régulier de cet appareil per- mettront à ce dernier de vous offrir un rendement optimal et une durée de vie prolongée et économique.
  • Page 31 CARACTÉRISTIQUES ET COMMANDES DE FONCTIONNEMENT PARE-ÉCLABOUSSURES PASSAGE D'ÉCOULEMENT DE LA GRAISSE TIROIR À GRAISSE PANNEAU À ACCÈS FRONTAL SOUPAPE DE SÛRETÉ POUR LE GAZ THERMOSTAT PATTES AJUSTABLES BOUTON DE RÉGLAGE DU GAZ BOUTON DE RÉGLAGE DE LA TEMPÉRATURE IL1833-FR Fig. 1 Plaque de comptoir à gaz – Caractéristiques et commandes de fonctionnement PANNEAU À...
  • Page 32 PRÉCAUTIONS ET RENSEIGNEMENTS GÉNÉRAUX Cet appareil est conçu pour la préparation d’aliments destinés à MISE EN GARDE: l’alimentation humaine. RISQUE Cet appareil est conçu pour la préparation d’aliments destinés à D’INCENDIE l’alimentation humaine. Aucune autre utilisation n’est recommandée Advenant qu’une odeur de ou autorisée par le fabricant ou ses agents.

  • Page 33: Installation

    INSTALLATION REMARQUE: NE PAS DÉBALLAGE ET INSPECTION jeter la boîte ou tout autre Extraire avec précaution la plaque de la boîte. Enlever toutes les emballage tant que l’appareil pellicules protectrices en plastique, les matériaux d’emballage et les n’a pas été inspecté pour accessoires de la plaque avant de la raccorder au gaz ou de procéder y détecter des dommages autrement à...
  • Page 34 INSTALLATION CONFORMITÉ AU CODE DES APPAREILS ALIMENTÉS DANGER: AU GAZ RISQUE D’INCENDIE L’installation du conduit de gaz du côté refoulement du compteur à gaz ou du régulateur de service jusqu’à la plaque doit être effectuée D’EXPLOSION par un technicien compétent et certifié ou détenant un permis pour l’installation d’équipement alimenté...
  • Page 35 INSTALLATION DANGER: INSTALLATION DE LA PLAQUE RISQUE Se reporter à la plaque signalétique. Vérifier le type de comburant et D’INCENDIE ET la pression, lesquels doivent correspondre aux spécifications de la D’EXPLOSION plaque signalétique. Le raccordement de la plaque au mauvais type de comburant et/ou de pression compromettra la sécurité...
  • Page 36 INSTALLATION MISE À L’ESSAI SOUS PRESSION DU CONDUIT À GAZ IMPORTANT: Le système de conduit principal doit être en mesure de fournir un LA MISE À L’ESSAI DE LA PRESSION DOIT ÊTRE volume/écoulement suffisant de comburant à la plaque afin de EFFECTUÉE PAR UN satisfaire les exigences d’apport opérationnel maximales.

  • Page 37: Réglage Initial

    RÉGLAGE INITIAL IMPORTANT: PURGE DE L’AIR DES CONDUITS DE GAZ L’air doit être purgé des conduits de gaz pour le démarrage initial. Mettre LE RÉGLAGE DE LA le bouton situé sur la soupape de sûreté à la position PILOT, l’enfoncer PRESSION DOIT ÊTRE et le maintenir ainsi jusqu’à...
  • Page 38 PRÉPARATION DE LA SURFACE DE LA PLAQUE HUILAGE DES PLAQUES STANDARDS Tel que fabriquée, la surface en acier de votre plaque Wells est dotée de pores microscopiques. Il est important de remplir ces pores avec de l’huile afin d’offrir une surface de cuisson antiadhésive rigide.
  • Page 39 Contacter le centre de dépannage autorisé édifice. de Wells pour toute réparation. Les soupapes forcées ou réparées Si une odeur de gaz est de façon inadéquate peuvent présenter un risque d’incendie et/ou détectée, fermer l’appareil...
  • Page 40 FONCTIONNEMENT UTILISATION DE LA PLAQUE MISE EN GARDE: Consulter le tableau ci-dessous pour les températures de cuisson RISQUE recommandées. Tourner le bouton de réglage de la température D’INCENDIE ET jusqu’à la température désirée. D’EXPLOSION Pour les surfaces standards: Si la veilleuse s’éteint, fermer •...

  • Page 41: Risque De Brûlures

    DIRECTIVES DE NETTOYAGE – PLAQUES STANDARDS ET RAINURÉES PRÉPARATION Régler la température à 220 °F (104 °C). ATTENTION: Laisser la température de la plaque RISQUE DE atteindre 220°F (104 °C) avant de BRÛLURES procéder. La plaque sera chaude pendant FRÉQUENCE Tous les jours les portions de cette procédure de nettoyage.
  • Page 42 DIRECTIVES DE NETTOYAGE – PLAQUES CHROMÉES PRÉPARATION Régler la température à 220 °F (104 °C). ATTENTION : Laisser la température de la plaque atteindre RISQUE DE 220 °F (104 °C) avant de procéder. BRÛLURES FRÉQUENCE Tous les jours La plaque sera chaude pendant les portions de cette OUTILS Racloir de style rasoir de 4 po, brosse en fibres...
  • Page 43 Dommage à un composant interne Wells pour procéder aux réparations. REMARQUE : Il n’y a aucun composant réparable par l’utilisateur dans la plaque. Pour tout type de dommage ou de mauvais fonctionnement, contacter un centre de dépannage autorisé de Wells pour effectuer toute réparation.
  • Page 44 WELLS MANUFACTURING 265 Hobson Street, Smithville, Tennessee 37166 telephone: 800-264-7827 www.wells-mfg.com...

This manual is also suitable for:

Wg2436gWg2424gWg3048gWg-2424-natWg-2436-nat

Table of Contents