Page 4
Neglecting maintenance or making changes to the setup of the machine can result in major hazards. While every effort has been made to ensure that the information in this manual is correct, Atlas Copco does not assume responsibility for possible errors.
To be read attentively and acted accordingly before operating, performing maintenance or repairing the unit. INTRODUCTION PICTOGRAMS AND SYMBOLS The policy of Atlas Copco is to provide the users of Take the necessary steps to keep unauthorized This manual contains safety instructions that, when their equipment with safe, reliable and efficient persons away from the unit and eliminate all possible not observed, can lead to dangerous situations.
In principle all Not observing the safety instructions may lead to repair on Atlas Copco equipment. maintenance has to be performed on a non-energised personal injury, damage to the equipment and pump.
UNINTENDED USE DATAPLATE The reliability of the pump is only guaranteed when it Reference Name is used according the specifications in this manual. The limits as indicated are not to be exceeded under Pump Type any circumstances. Production Date Do not use the pump to transport water for human consumption, for water well pumping or for Protection Class installation in an explosive atmosphere.
• Additional lip seal for extended life time of the Handle IMPELLER primary seal. Outer casing The WEDA 04 and 08 pumps are equipped with a polyurethane semi vortex impeller. Seal casing WEDA 04 and 08 are compact versatile dewatering pumps for various pumping needs. The polyurethane...
Operating instructions TRANSPORT STOPPING Take the plug out of the socket and take the pump out Always use the handle to lift the pump. Never operate the pump without the of the pump site. If the pump has been operating in Never use the power cable to lift or strainer.
Maintenance PREVENTIVE MAINTENANCE SCHEDULE Item (refer to separate paragraphs) Every month Every 3 months Every 6 months External damage, loose parts Check Motor insulation resistance Measure Check Change Impeller Check Power cable Check Cable entry Check EXTERNAL DAMAGE, LOOSE PARTS POWER CABLE Make sure that all screws, bolts and nuts are tight.
Troubleshooting Problem Cause Action Pump will not run 1. Fuse blown or circuit breaker tripped 1. Replace fuse or reset circuit breaker 2. Broken cable 2. Replace cable 3. Power failure 3. Restore power supply 4. Impeller jammed 4. Clean impeller 5.
Technical details Unit WEDA04 WEDA08 WEDA04B Discharge, smooth and threaded BSP inch 2” 2” 1”(opt2”) Motor rating Rated Max power consumption 1200 Max Flow 19.5 Head 11.3 15.2 Weight 12.4 Max solids handling Cable length Max submersed depth Impeller type semi vortex semi vortex semi vortex...
Spare parts ORDERING SPARE PARTS To avoid errors in delivery, please give the following information when ordering spare parts: 1. Pump type 2. Pump serial number 3. Quantity required 4. Part number 5. Part description - 17 -...
Page 19
Ref No. Parts Name Parts No. Quantity Ref No. Parts Name Parts No. Quantity WEDA 04 WEDA 04 Power Cable 1605241600 Pump Casing 1605243900 Cable Band 1605241700 Packing 1605244000 Cable Nut 1605241800 Gasket 1605244100 Motor Assy Casing 1605244200 Motor Protector...
Page 21
Ref No. Parts Name Parts No. Quantity Ref No. Parts Name Parts No. Quantity WEDA 08 WEDA 08 Power Cable 1605241600 Pump Casing 1605243900 Cable Band 1605241700 Packing 1605244000 Cable Nut 1605241800 Gasket 1605244100 Motor Assy Casing 1605244300 Motor Protector 1605242200 Handle 1605244400...
Page 23
Ref No. Parts Name Parts No. Quantity Ref No. Parts Name Parts No. Quantity WEDA 04B WEDA 04B Power Cable 1605241600 Ball valve 1605246600 Cable Band 1605241700 Sleeve 1605243800 Cable Nut 1605241800 Pump Casing 1605243950 Motor Assy Packing 1605244000 Motor Protector 1605242100 Gasket 1605244100...
In the event of a warranty claim please contact your operating lifetime drain and dispose of all fluids of local dealer or the nearest authorized Atlas Copco Recycling and disposal policies are part of the according the applicable local disposal regulations.
We, IRMER+ELZE Kompressoren GmbH, declare under our sole responsibility, that the product Machine name: portable submersible dewatering pump WEDA 04, WEDA 08, WEDA 04B, WEDA 08S Machine type: Serial number: Which falls under the provisions of article 12.2 of the EC Directive 2006/42/EC on the approximation of the laws of the Member States relating to machinery, is in conformity with the relevant Essential Health and Safety Requirements of this directive.
Need help?
Do you have a question about the WEDA 04 and is the answer not in the manual?
Questions and answers