Bmw Motorrad Auxiliary Stand - BMW G 650 XCHALLENGE Manual

Adjust the chain tension
( 74)
Remove the auxiliary stand.
BMW Motorrad
auxiliary stand
Installing auxiliary stand
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Use the auxiliary stand with
the number (001631) and the
H adapter with the number
(001639).
With the lifting lever to the left,
slip the auxiliary stand into po-
sition underneath the motor-
cycle, between the side stand
and the rear wheel.
On the left-hand side, slip
stud 1 half-way into mount 2.
On the right-hand side,
pull stud 3 all the way into
mount 4.
Push split pin 5 into the hole.
8
81
z