INTRODUCTION Thank you for choosing our smart battery charger. The charger has been designed to provide safe and efficient charging of 12V/24V batteries. This manual contains all the necessary information for its use. If you have any questions after reading this manual, please contact our Customer Service Department.
6. Do not block the ventilation holes or use the charger when the cooling fan is not working. 7. Do not leave the charger unattended during use. 8. Protect the unit from rain and water to avoid damage. 9. Persons without the appropriate qualifications must not open the device or change its purpose.
appendix Illustration 11 in the Current battery capacity appendix CHOICE OF CHARGING MODE Figure 12 in the appendix Illustration For large batteries (fast charging) appendix 12V : Maximum charge current : 8A 24V : Maximum charge current : 4A Illustration For AGM GEL and calcium batteries appendix Illustration...
Page 6
The CC stage is a charge of up to 80% of the battery capacity, with maximum current kept constant and high voltage, CV stage The rectifier keeps the charging voltage constant between 14.1VDC and 14.8VDC, reducing the charging current, The FLOAT stage is the so-called maintenance stage in which the battery has already reached 95% capacity and gradually reaches 100%, the charging voltage is reduced to a constant value between 13.0VDC and 13.8 VDC.
Page 7
UTILISATION This product is subject to the regulations for the disposal of electrical and electronic equipment (WEEE). It must not be disposed of with municipal waste. Take the charger to an electro-waste collection point that provides safe recycling in accordance with GPSR standards. Check where the nearest electro-waste collection points are located.
Need help?
Do you have a question about the 52490 and is the answer not in the manual?
Questions and answers