Related Manuals for Qoltec 51955
Summary of Contents for Qoltec 51955
- Page 1 QOLTEC OPERATING INSTRUCTIONS BATTERY CHARGER AC-DC MODEL: 51955/51956/51957/51958/5195...
-
Page 2: Connecting The Charger To The Battery
INTRODUCTION Thank you for your trust and for choosing an AC-DC type charger for charging different types of batteries, including LiFePO4, GEL, AGM. Equipped with a switch, it allows you to select the appropriate charging mode depending on the type of battery. We are confident that the product will meet your expectations. -
Page 3: Three-Stage Charging
SWITCHING ON THE CHARGER 1. Connect the AC power cord to the charger and AC outlet. 2. Set the ON/OFF switch to the ON position. SWITCHING OFF THE CHARGER 1. Disconnect the AC power cord from the AC outlet. 2. Set the ON/OFF switch to the OFF position. 3. - Page 4 Calcium 14.6V 13.6V 14.6V 13.4V 14.2V 13.2V Power mode, constant voltage setting 13.8V 12.0V TECHNICAL SPECIFICATION / Charging settings Model 51955 51956 51957 51958 51959 Input voltage 180-260 VAC-50Hz Loading 14.2-15.D VDC (selectable) mass/ absorption Float charging 13.2-13.B VDC (selectable) LiFePO4 14.7 V+/-0.1 VDC...
-
Page 5: Warranty And Technical Support
PROBLEM SOLVING Status Possible cause Propose a measure remedial No DC output No AC input Check power source or charger cannot start Exclusion due to Wait until the device overheating cools down Bad terminal Check the connection contact between the charger and the battery battery.
Need help?
Do you have a question about the 51955 and is the answer not in the manual?
Questions and answers