Options - Berkeley Varitronics Systems RedFrog User Manual

Options

Use this screen to change the output display to either dBm or
Watts.
You may also adjust your average forward power measurements
using the up/down arrows and enter buttons on the right side of this
screen
You may also toggle TDD mode on or off (recommended to keep
off) TDD should only be turned on when you want to measure a
TDD (Time Division Duplex) for TDD LTE and future 56 bands.
The CALIBRATE button is disabled and reserved to BVS support.
Contact your BVS sales or support staff member if you have any
questions.
Touch the BACK arrow in the upper left corner of the screen to
navigate back to the previous screen.
8