Unboxing & Setup - Berkeley Varitronics Systems RedFrog User Manual

to charge internal battery. Turn off the unit and let it cool down before attempting to charge. Turn on the unit's
power using the ON/OFF switch. Connect the USB-A to USB-mini cable from your unit to a PC running the
included RedFrog Controller software. Connect the supplied barrel plug to adapt to your required power output
connection.
FROM POWER SOURCE
Unboxing & Setup
Remove the rugged Pelican 1200 travel case from packaging. Be sure to keep
all shipping materials in case your RedFrog unit requires shipping back to BVS
for repair or calibration.
The case includes the RedFrog-Pro wide band power meter unit itself, DC power
transformer, USB-A to USB-mini cable, USB stick containing PC controller
software and this user manual, calibration certificate and Type 'N' to Type 'N'
barrel plug adapter.
We recommend turning the power switch OFF while charging.
Before operating your unit, be sure to plug in the included power adapter to
fully charge the unit. The red LED will turn on indicating charging in
process. The red LED will turn off when the unit is fully charged.
NOTE: If the red LED is flashing, it indicates the unit temperature is too hot
2
TO ANTENNA