Advertisement
Advertisement
Table of Contents
Related Manuals for Banda Audioparts BD 400.4
Summary of Contents for Banda Audioparts BD 400.4
- Page 1 INSTRUCTION MANUAL Read before using...
- Page 2 TABLE OF CONTENTS Introduction Description Technical Specifications /Bandaaudioparts /banda_audioparts @BandaAudiopartsOficial www.bandaaudioparts.com...
- Page 3 INTRODUCTION Congratulations! You have just purchased a product with Banda Audioparts quality. Developed by qualified engineers and in a high-tech laboratory. To ensure optimal operation, please read this manual carefully before using the product. Keep the manual in a safe and accessible place for future reference.
-
Page 4: Front Panel
DESCRIPTION FRONT PANEL... - Page 5 DESCRIPTION INFORMATION GND INPUT GAIN CONTROL (CHANNELS 1-2) CONNECT TO THE VEHICLE CHASSIS (GROUND) CROSSOVER SWITCH (CHANNELS 1-2) DRIVE INPUT 12VDC (+) RCA INPUT (CHANNEL 1-2) CONNECT ANTENNA TO ELECTRICITY (REMOTE) RCA INPUT (CHANNEL 3-4) 12VDC POSITIVE INPUT CROSSOVER SWITCH (CHANNELS 3-4) GAIN CONTROL (CHANNELS 3-4) CHANNEL 1 CHANNEL 2...
-
Page 6: Crossover Switch
DESCRIPTION CROSSOVER SWITCH CROSSOVER SWITCH CROSSOVER SWITCH CHANNELS 1-2 CHANNELS 3-4 Allows you to adjust the Crossover using the selector switch CROSSOVER SWITCH in the LOW (L), FLAT (F) and HIGH (L) positions. This function, when selected in the LOW position, leaves the device only adjustable for a lower frequency (20Hz - 90Hz @ 12dB/8º... - Page 7 DESCRIPTION CROSSOVER SWITCH...
-
Page 8: Gain Control
DESCRIPTION GAIN CONTROL GAIN CONTROL GAIN CONTROL (CHANNELS 1-2) (CHANNELS 3-4) GAIN CONTROL (CHANNELS 1-2) GAIN CONTROL (CHANNELS 3-4) GAIN CH 1-2 VOLUME GAIN CH 3-4 VOLUME GAIN CH 1-2 VOLUME GAIN CH 3-4 VOLUME... -
Page 9: Connection Examples
DESCRIPTION CONNECTION EXAMPLES BRIDGED CHANNEL 4 CHANNEL 3 CHANNELS 1 AND 2 Up to 4 Drivers and Tweeters 25Wrms 2 Mid-Bass 50Wrms 4 Ohms in Subwoofer or Woofer 8 ohms each in parallel resulting in 2 parallel resulting in 2 ohms 200Wrms 4 Ohms ohms Single Coil 4 Ohms... - Page 10 DESCRIPTION CONNECTION EXAMPLES MANDATORY USE OF Y CABLE FOR ALL BRIDGE CONNECTIONS BRIDGED CHANNEL 4 CHANNEL 3 CHANNELS 1 AND 2 2 Speakers 50Wrms 4 Ohms in 2 Speakers 50Wrms 4 Ohms in Subwoofer 200Wrms 4 Ohms parallel resulting in 2 ohms parallel resulting in 2 ohms Single Coil 4 Ohms Or Double Coil 2+2 Ohms (COILS...
-
Page 11: Technical Specifications
TECHNICAL SPECIFICATIONS PARAMETERS BD400.4 Maximum Power 14.4v @ 1 Ohm Maximum Power 14.4v @ 2 Ohms 4 x 140 WRMS Maximum Power 14.4v @ 4 Ohms 4 x 85 WRMS Maximum Power 14.4v Bridged @ 4 Ohms 2 x 280 WRMS Maximum Power 12.6v @ 1 Ohm Maximum Power 12.6v @ 2 Ohms 4 x 100 WRMS... - Page 12 TECHNICAL SPECIFICATIONS PARAMETERS BD400.4 HPF (Subsonic) 90Hz - 20kHz @ 12dB/oitava Linkwitz-Riley LPF (Crossover) 20Hz - 90Hz @ 12dB/oitava Linkwitz-Riley Recommended Fuse Rest Current 700mA Maximum Current (sine signal) Maximum Current (musical signal) Power Cables (min. recommended) 10mm / 9 AWG Output Cables (min.
-
Page 14: Warranty Terms
WARRANTY TERMS Warranty valid for 12 months (one year), starting from the date of purchase, if purchased from an authorized Banda Audioparts dealer. Will be covered by warranty components and/or parts comproved that shows failures in process manufacture or damaged components. - Page 16 /Bandaaudioparts /banda_audioparts @BandaAudiopartsOficial www.bandaaudioparts.com...
Need help?
Do you have a question about the BD 400.4 and is the answer not in the manual?
Questions and answers