1. PREFACE ® Welcome to purchase and use our manual wheelchair� This product is specially processed from magnesium-aluminum alloy, which is an aviation material� It is with high strength and light weight, so it can be lighter and more comfortable for users� Your safety is the most important for us�...
2. Dos and don’ts ■wheelchair*1pc ■wheelchair*1pc ■instruction manual *1pc Please check if the main frame and accessories are missing, damage or lack, please contact 2. DOS AND DON’TS the dealer or the manufacture in time. roduct qualified card*1pc, warranty card*1pc ■p ■seat cushion*1pc and back cushion*1pc ®...
Page 6
Caution Indicates that personal injury or items damage may occur when 2. Dos and don’ts Prohibit Indicates it is not allowed Reading the Indicates to read the instruction manual carefully misused 2.1 Open-package inspection 2. DOS AND DON’TS load capacity The max load capacity instruction manual ®...
Mandatory: Please do not hold the tube which on seat both sides when you press down to prevent your hand from being pinch, when unfolding the wheelchair. 2. DOS AND DON’TS ® Mandatory: The plates should be adjusted to a height of 2 inches above the ground. Mandatory: The wheelchair must be properly installed with the anti-tipping before use.The ground height of anti-tipping should remain 1 inch.
3. Product description 3. PRODUCT DESCRIPTION ® 3.1 Product Feature 3.1.1 Wheelchairs can be operated by user or also can be assisted by family members, escorts or caretakers. 3.1 Product Feature 3.1.2 It is a standard wheelchair. The backrest has no function of angle adjustment. There is also 3�1�1 Wheelchairs can be operated by user or also can be assisted by family no function for exercise and bathing, it is just only a standard wheelchair.
4. INSTALLATION AND ADJUSTMENT ® Fig 4-3 2. Dos and don’ts 4.2 Unfolding And Folding The Backrest 4.2 Unfolding and folding the backrest 4�2�1 Unfolding 4.2.1 Unfolding Hold the handle and lift up until the pin pops out� (Fig 4-4, Fig 4-5) Hold the handle and lift up until the pin pops out.
4. INSTALLATION AND ADJUSTMENT ® Fig 4-6 Caution: Be careful not to pinch your hands. 4.3 Assembling And Removing The Footrests 4�3�1 Assembling 4.3 Assembling and removing the footrests 4.3.1 Assembling 4�3�1�1 Insert the footrest shaft into the tube from the side� 4.3.1.1 Insert the footrest shaft into the tube from the side.
4. INSTALLATION AND ADJUSTMENT ® Footplate Hex key Washer 4.4 Assembling And Removing The Rear Wheels Bolt 4�4�1 Assembling 4.4 Assembling and removing the rear wheels 4�4�1�1 Press down the quick release button, then insert the quick release into the 4.4.1 Assembling inner hold of the matched frame tube until the pin pops out�...
4. INSTALLATION AND ADJUSTMENT ® 4.6 Transporting Carrying The Wheelchair 4�6�1 The best way to move a wheelchair is to use its wheels and push the wheelchair to move� 4�6�2 You can also lift the wheelchair by grasping the seat tube after folding the wheelchair�...
Armrest latch 5. USE ® 5. Use 5. Use 5.1 My operating instructions 5.1 My operating instructions 5.1.1 You can drive normally by rolling the handrim on the sidewalk. 5.1 My Operating Instructions 5.1.1 You can drive normally by rolling the handrim on the sidewalk. 5�1�1 You can drive normally by rolling the handrim on the sidewalk�...
5. USE 5.1.4 When there is a groove on the road, please cross the groove ® at a right angle to the direction of the groove. 5.1.4 When there is a groove on the road, please cross the groove If the groove is too wide and too deep, please don't cross it at a right angle to the direction of the groove.
5.2.3 When going uphill, the pusher keep 5. USE leaning forward, push the wheelchair uphill. ® 5.2.3 When going uphill, the pusher keep When going downhill, keep the normal posture, leaning forward, push the wheelchair uphill. and back in the opposite direction. When going downhill, keep the normal posture, and back in the opposite direction.
5. USE ® 5.5 First Using Wheelchair 5�5�1 Operating the wheelchair by user� 5�5�1�1 Reading the instruction manual carefully, then assemble the wheelchair correctly and adjust the footrest, rear wheels and anti-tipping height properly� 5�5�1�2 Correctly assemble the cushions of backrest and seat� 5�5�1�3 Check that the brake and fold switch are locked�...
5. USE ® 2. Dos and don’ts 2. Dos and don’ts 2.1 Open-package inspection 5.6 Moving The User In And Off The Wheelchair Please check if the main frame and accessories are missing, damage or lack, please contact 2.1 Open-package inspection the dealer or the manufacture in time.
6. MAINTENANCE ® 2. Dos and don’ts 2.1 Open-package inspection Please check if the main frame and accessories are missing, damage or lack, please contact 6.1 Cleaning The Wheelchair the dealer or the manufacture in time. ■wheelchair*1pc 6�1�1 Seat and backrest cushions can be washed with water and mild detergent ■seat cushion*1pc and back cushion*1pc once a week�...
6. MAINTENANCE ® C. All parts must be thoroughly dry before use after cleaning and disinfection. 6.3 Inspection, service and maintenance 6.3.1 Before using a wheelchair, you should check the following everyday. A..After the wheelchair has been used for a period of time, it is necessary to check whether 6.3 Inspection, Service And Maintenance each component is loose.
7. WARRANTY ® 7.1 Repair And Replacement The warranty period is one year from the date of sale� Purchase from the designated dealer or the manufacture, operate and use in accordance with this instruction manual, and repair at the designated maintenance place during the warranty period�...
8. TRANSPORTATION AND STORAGE ® 8.1 Transportation And Storage Ambient Temperature Range: -13°F — 104°F; Relative Humidity: ≤80%; Atmospheric Pressure Range: 80kPa~105kPa; Can be transported in general transportation�...
Page 24
® If you have any questions, call us at our toll free number: 1-800-958-8324...
Need help?
Do you have a question about the so lite c2 and is the answer not in the manual?
Questions and answers