1. Manuals
  2. Brands
  3. Hiland Manuals
  4. Gate Opener
  5. SWG3100
  6. User manual

Hiland SWG3100 User Manual

Dc swing gate opener
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SWG3100/SWG3101 DC
Swing Gate Opener
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SWG3100 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Hiland SWG3100

Summary of Contents for Hiland SWG3100

  • Page 1 SWG3100/SWG3101 DC Swing Gate Opener User Manual...

  • Page 2: Table Of Contents

    CONTENTS: 1. Safety Instruction ............................1 2. Packing List ..............................2 3. Technical Parameters ........................... 3 4. Installation ..............................4 4.1 Installation Drawing ..............................4 4.2 Size of Main Machine and Mounting Bracket ....................... 4 4.2.1 Size of Main Machine ............................4 4.2.2 Size of Mounting Bracket ..........................

  • Page 3: Safety Instruction

    Dear users, Thank you for choosing this product. Please read the manual carefully before assembling and using it. Please do not leave out the manual if you send this product to a third party. 1. Safety Instruction ● Please read this manual carefully before installation, in which involves with important information about installation、using、 maintenance and safety.
  • Page 4 2. Packing List (Standard) Picture Name Quantity Main machine Manual release key Remote control Control box Wall bracket Front mounting bracket Connecting bracket Screw M8X25 Mounting screw (short) Screw M8× 45 Self-locking Nut M8...

  • Page 5: Packing List

    Packing List (Optional) Picture Name Quantity Infrared sensor Wireless keypad Alarm lamp Electric lock Storage battery 3. Technical Parameters Model SWG3100 SWG3101 Power supply 220V/50Hz 110V/60Hz Motor power Gate moving speed 18~22s / 90° 18~22s / 90° Max.single-leaf weight 300kg 300kg Max.single-leaf length...

  • Page 6: Installation

    14kg 4. Installation SWG3100/SWG3101 swing gate opener is applicable to single leaf gate weight less than 300kg, and the length shorter than 2.5m. The drive mode adopts planetary transmission to combine with the screw rod transmission. This gate opener must be installed inside the enclosure or yard for protection.

  • Page 7: Size Of Mounting Bracket

    709.5mmMIN 1037.5mmMAX Figure 2 4.2.2 Size of Mounting Bracket Figure 3 4.3 Installation Steps 4.3.1 Preparation before Main Machine Installation a) Before installing the door opener, please confirm that the doors were installed correctly, please ensure that the door can be manually operated smoothly, and the door safety stopper can effectively prevent the door to continue moving. b) Please keep a distance of 45-50mm between the door bottom and the ground for installing the electric lock.

  • Page 8: Accessory Installation

    One PVC pipe for motor and power cables, the other one for control cables. Mounting brackets fixing In order to install the SWG3100/SWG3101 main machines firmly, it is recommended to use the expansion screws to fix the mounting brackets. 4.3.2 Accessory Installation a) Before installing the main machines, please install the wall bracket on the wall first, then fix the connecting bracket, finally install the front mounting bracket on the door.

  • Page 9: Main Machine Installation

    along the cable. d) Before the installation, please unlock the two main machines. Unlock method: Open the manual release cover, insert the manual release key, rotate the key until it’s released, as shown in Figure 6, then turn the telescopic arm, you’ll find it is stretched easily.
  • Page 10 Note: Note: The The limit limit stopper stopper has has to to be be installed. installed. Note: Note: The The gate gate safety safety stopper stopper has has to to be installed installed (should (should be be prepared prepared by users users themselves) themselves)
  • Page 11 Note: Note: The The gate gate safety safety stopper stopper has has to to be installed installed (should (should be be prepared prepared by users users themselves) themselves) Install Install the the limit limit stopper stopper Figure 9 95° 100° SIZE(mm) 100°...

  • Page 12: Size Of Control Box

    4.3.4 Size of Control Box 170mm 78.75mm Figure 10 Warning To ensure safety and protect the machines, please install a gate stopper at the open limit position when the ⚫ door opens outward to prevent the gate from running over its travel. Meanwhile, to enable the 2 swings to close to its accurate limit position, please install a limit stopper at the close limit position (as shown in figure 9).

  • Page 13: Wiring And Debugging

    5. Wiring and Debugging 5.1 Wiring Instructions Battery Battery 230VAc 230VAc 24V(1) 24V(1) FUSE FUSE 15A (1)just (1)just a battery battery voltage voltage can be be connected connected at at once, once, or or 12V 12V or or 24V 12V(1) 12V(1) Transformer Transformer...
  • Page 14 +BATT- +BATT- AC IN IN +SOLAR- +SOLAR- S.D. S.D. SPEED SPEED OBSTD. OBSTD. I D 2 1 0 V 1 . 0 LOCK LOCK OUT LPW +24 +12 +12 COM 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21...

  • Page 15: Inputs Status

    It always stops motors and blocks control unit activity. 11. Stop input (NC) 12. Common 24V/12Vdc 250mA Space-13-14. Power supply output 12/24V 1A (fix on MOT2） 15-16. Electric lock output 12/24V 1A 17-18. Flashing light output 19-20. Output motor 1 21-22.

  • Page 16: Travel Setting

    _ _: No input active. ST: Stop input active. P5: Photo stop input active. PC: Photocells input active. EO: Analogic edge opening input active. EC: Analogic edge closing input active. SB: Start input active. SP: Pedestrian input active. OP: Open input active. CL: close input active.

  • Page 17: Control Board Settings

    finished.（The default remote control mode is Step by Step） Press button TS3 and hold on until display shows OK, all the remotes have been deleted. Figure 14 5.7 Control Board Settings Base Menu Push enter 1 for at least 1 second to enter base menu. OL is on the display, with up/down it’s possible to select other functions of this menu.
  • Page 18 Select OL and push enter, with up/down select wanted logic between following end push once enter. Check tab operating logic for further information. 5T: Step by step logic. At: Automatic closing with stop function. CD: Automatic closing for condominium function. To exit this menu select EX or push up/down together.

  • Page 19: Advance Menu

    C2 close motor2 EX Exit Keep pushed enter to start the selected motor in dead man mode. 5.9 Advance Menu Push enter button till on the display is shown TM. With up/down it’s possible to select all items In this menu. To exit this menu select EX or push up/down together.
  • Page 20 Figure 16 escription: Advance menu d TM working times menu: In this menu it’s possible to modify working times of control unit: T1- Working time motor1 51- Start time slowdown motor1 T2- Working time motor2 52- Start time slowdown motor2 DO-Motors delay opening DC- Motors delay closing TL-Electric lock activation menu.
  • Page 21 RC release torque at work end: Enabling this function, the motors reverse direction for a while to release the torque at end of work .Use up/down to choose yes(YS),not (NT) or exit(EX). Push enter to confirm. EO Enable opening analogue edge: Enabling this function it’s enabled the edge active in opening period.
  • Page 22 Default settings (Factory presets) Here it follows list default settings. The same set after a D2 command of advanced menu. Figure 17...

  • Page 23: Infrared Photocell Connection (Optional)

    5.10 Infrared Photocell Connection (Optional) Before connecting the infrared photocell, please remove the jumper wire between terminal 5 and 6 first. Infrared photocell function: To protect passengers or property from clipping, during gate closing, once infrared photocell ray is cut, the gate will open immediately. The distance between photocell receiver and emitter should not be less than 2 meters, otherwise will affect the induction of the photocell.

  • Page 24: Solar Panel Connection (Optional)

    5.11 Solar Panel Connection (Optional) Solar Solar panel panel Solar Solar charger charger S T R S T R S PD S PD P HS P HS ST P ST P － ＋ － Storage Storage battery battery ＋ Figure 19...

  • Page 25: Others

    6. Others 6.1 Maintenance Check whether the gate operates normally every month. For the sake of safety, each gate is suggested to be equipped with infrared protector, and regular inspection is required as well. Before installation and operation of the gate opener, please read all instructions carefully. We reserve the right to change the instruction without prior notice.

  • Page 26: Warranty

    Warranty Warranty Ordinance 1. To repair against this warranty card and invoice during the warranty period. 2. Warranty period: 1 year after the date of invoice. 3. Without unauthorized dismantling, any product broken or damage due to quality problem, we’ll offer the repair service for free or replace for free.

This manual is also suitable for:

Swg3101

Table of Contents