SLG6150X/SLG6170X DC Sliding gate opener user manual -SL5010-A1 Dear users, Thank you for choosing this product. Please read this manual carefully before installation and use. Please do not forget to include this manual if you send the product to a third party. 1.
SLG6150X/SLG6170X DC Sliding gate opener user manual -SL5010-A1 2. Packing List (standard) Picture Name Quantity Main machine Manual release key Remote control Magnetic limit switch accessories Magnetic limit switch block Limit switch block mounting screw M6X18 Outer hexagonal bolts M8×60 Foundation bolt M8 &...
SLG6150X/SLG6170X DC Sliding gate opener user manual -SL5010-A1 Noise ≤58dB ≤58dB ≤58dB ≤58dB Working duty S2, 20min S2, 20min S2, 20min S2, 20min Recording of up remote controls Frequency 433.92 MHz 433.92 MHz 433.92 MHz 433.92 MHz Working temperature -20° C ~ +70° C -20°...
SLG6150X/SLG6170X DC Sliding gate opener user manual -SL5010-A1 4.2 Size of Main Machine and Accessories 4.2.1 Size of Main Machine Figure 2 4.2.2 Size of Mounting Plate 204±0.3 8× 10 Φ Figure 3 4.3 Installation Procedures 4.3.1 Preparation Work before Installation Please make sure that the sliding gate is correctly installed, the gate rail is horizontal, and the gate can be manually moved smoothly before installing the gate opener.
SLG6150X/SLG6170X DC Sliding gate opener user manual -SL5010-A1 In order to guarantee the normal operation of the gate opener and protect the cables from damages, please bury the motor & power cable and controlling cable separately with two PVC tubes. Concrete pedestal Please cast a concrete pedestal with the size can be 400mm x 250mm, depth be 200mm in advance, so as to firmly Please make sure the distance between the gate and gate...
SLG6150X/SLG6170X DC Sliding gate opener user manual -SL5010-A1 4.3.3 Gear Rack Installation Fix the mounting screws to the rack. ⚫ Put the rack on the output gear, make the rack engage with the output gear then weld the mounting screw to the ⚫...
SLG6150X/SLG6170X DC Sliding gate opener user manual -SL5010-A1 ·Please note that for this product, one control can only drive one main machine, otherwise, the control system will be damaged. ·Earth leakage circuit breaker must be installed in where the gate movement can be seen, and the minimum mounting height is 1.5m to avoid being touched by children.
SLG6150X/SLG6170X DC Sliding gate opener user manual -SL5010-A1 t i n f t s t i n × × × × Figure 9 Note: The default setting is right side mounting. (According to actual installation,please refer to the “Note” of section 5.9 to adjust.) 5 Control Board Programming 5.1 Wiring Instruction...
Page 12
SLG6150X/SLG6170X DC Sliding gate opener user manual -SL5010-A1 需且仅需一种电池连接方式,或 或 。 Choose only one of the wiring for the battery: 12V or 24V 230Vac 230Vac 注意 请根据所附电池选择合适的充电电压。 Note: The voltage should be follow the battery 保险丝座 Fuse 变压器 ( ) (...
SLG6150X/SLG6170X DC Sliding gate opener user manual -SL5010-A1 If activated during gate closing, it’ll change to open; If activated during gate opening, it’ll stop running and waiting for activation invalid then change to close. 15. Infrared Photocell Input If the emergency stop is activated during the gate waiting for it’s automatically close period, it will keep waiting;...
SLG6150X/SLG6170X DC Sliding gate opener user manual -SL5010-A1 5.3 Potentiometer Adjustment Potentiometer TR1 for Adjusting the Sensitivity of Meeting Obstacles This TR1 is for adjusting the sensitivity of meeting obstacles (clockwise to increase, anticlockwise to decrease). This adjustment will be made only after the travel learning is finished. If the installation site Note: The potentiometer is adjusted to it’s maximum, the obstacles detecting function will be disabled.
SLG6150X/SLG6170X DC Sliding gate opener user manual -SL5010-A1 Figure 11 5.8 Function Setting Press MODE to enter into menu, the digital will display the current selection , press △ or ▽ to select other options. If need to exit the current menu, you can press button or press △...
SLG6150X/SLG6170X DC Sliding gate opener user manual -SL5010-A1 3 sec. Slowdown Speed Time N.C. N.C. Infrared Photocell Emergency N.O. Stop Setting N.C. N.C. Limit Switch Setting N.O. 5.9 Infrared Photocell Connection (optional) Infrared photocell function: In the closing process, when infrared ray of the photocell is covered by people or objects during its detection range, the gate will open immediately for security protection.
SLG6150X/SLG6170X DC Sliding gate opener user manual -SL5010-A1 For the sake of safety, each gate is suggested to be equipped with infrared photocell, besides, regular inspection is required. Before installation and operation of the gate opener, please read all instructions carefully. Our company reserves the right to change the instruction without prior notice.
SLG6150X/SLG6170X DC Sliding gate opener user manual -SL5010-A1 Automatic close function was activated but Please refer to 5.9 to change the Gate opens automatically the opening direction was wrongly set. opening direction. Warranty Warranty Ordinance 1. To repair against this warranty card and invoice during the warranty period. 2.
Need help?
Do you have a question about the SLG6150 Series and is the answer not in the manual?
Questions and answers