Related Manuals for Hiland SLG5400XAC
Summary of Contents for Hiland SLG5400XAC
- Page 1 Sliding gate opener SLG5400XAC/SLG5550XAC (SL07X0)user manual Sliding Gate Opener SLG5400XAC/SLG5550XAC User Manual (With control board SL07X0)
-
Page 2: Safety Instruction
Sliding gate opener SLG5400XAC/SLG5550XAC (SL07X0)user manual Dear users, Thank you for choosing this product. Please read the manual carefully before assembling and using it. Please do not leave out the manual if you send this product to a third party. - Page 3 Sliding gate opener SLG5400XAC/SLG5550XAC (SL07X0)user manual 2. Packing List (standard) Picture Name Quantity Main engine Manual release key According to the model already choose Remote control Spring limit switch accessories box / Magnetic limit switch accessories box Spring limit switch block...
-
Page 4: Technical Parameters
Sliding gate opener SLG5400XAC/SLG5550XAC (SL07X0)user manual Packing list (Optional) Picture Name Quantity Metal rack 1m/pc Nylon rack 1m/pc Keypad（different models are optional） Flash lamp（different models are optional） （different models Photocell 1pair are optional） Mounting plate 1piece 3. Technical parameters Model... -
Page 5: Installation
Sliding gate opener SLG5400XAC/SLG5550XAC (SL07X0)user manual Output torque 22N.m 22N.m 22N.m 22N.m Output shaft 50mm 50mm 50mm 50mm height Frequency 433.92 MHz 433.92 MHz 433.92 MHz 433.92 MHz Working -20° C - +70° C -20° C - +70° C -20° C - +70° C -20°... - Page 6 Sliding gate opener SLG5400XAC/SLG5550XAC (SL07X0)user manual 4.1 Installation drawing Figure 1 ① Gate opener; ② Wireless keypad ; ③ Gate; ④ Infrared sensor; ⑤ Alarm lamp; ⑥ Safety stop block; ⑦ Gear rack; ⑧ Remote control; 4.2 Size of main engine and accessories...
- Page 7 Sliding gate opener SLG5400XAC/SLG5550XAC (SL07X0)user manual Figure 2 4.2.2 Size of mounting plate 4×φ10 150±0.3 Figure 3 4.3 Installation procedures 4.3.1 Preparation work before installation Please ensure that the sliding gate is correctly installed, the gate rail is horizontal, and the gate can glide back and forth smoothly when moved by hands before installing the gate opener.
- Page 8 Sliding gate opener SLG5400XAC/SLG5550XAC (SL07X0)user manual Figure 4 4.3.2 Main engine installation a) Dismantle the plastic housing on the main engine before installation and keep relevant fasteners properly; b) Please prepare the power line for connecting mounting plate and main engine (the number of power supply cable core shall not be less than 3 PCS, the sectional area of cable core shall not be lower than 1.5mm²...
- Page 9 Sliding gate opener SLG5400XAC/SLG5550XAC (SL07X0)user manual 4.3.3 Gear rack installation Fix the mounting screws to the rack. Put the rack on the output gear, and weld the mounting screw to the gate (each screw with one solder joints firstly).
- Page 10 Sliding gate opener SLG5400XAC/SLG5550XAC (SL07X0)user manual · After installation, please check whether the mechanical property is good or not, whether gate movement after manual unlocking is flexible or not, and whether the infrared sensor (optional) is installed correctly and effectively.
-
Page 11: Control Board Wiring
Sliding gate opener SLG5400XAC/SLG5550XAC (SL07X0)user manual Figure 10 The installation of magnetic limit switch block is shown in Figure 11: Left side mounting Right side mounting M6× 18 M6× 18 M6× 18 M6× 18 Figure 11 Note: The default setting is right side mounting. (According to actual situation, please refer to the “Note”... - Page 12 Sliding gate opener SLG5400XAC/SLG5550XAC (SL07X0)user manual 5.4 Controller wiring instructions 5.4.1 Flash lamp interface: for connecting the flash lamp (220VAC), it only work during operation. 5.4.2 The Photocell switch interface: for connecting the infrared protection switch (infrared switch NC contact) and 24VAC can be used as power supply. If you do not use the infrared protection interface, then you need to make the terminal shorted connect (Shorted in factory).
- Page 13 Sliding gate opener SLG5400XAC/SLG5550XAC (SL07X0)user manual 5.4.4 Dip switch settings: DIP7 DIP8： Auto close time DIP5 DIP6 ： function cancelled DIP4 Latch and non-latch OFF OFF ： No Auto close Deadman,latch ON： OFF ON ： OFF： Non-latch OFF ： ON ：...
- Page 14 Sliding gate opener SLG5400XAC/SLG5550XAC (SL07X0)user manual 7. Operational processes 7.1 Three button control process (DIP 2 at OFF position) 7.2 Single button control process (DIP 2 at ON position)
-
Page 15: Maintenance
1. remove the resistance working 2. resistance potentiometer setting too 2. reset the resistance low or changes after long time potentiometer The interpretation and ownership of this manual belong to Hiland company. Any change of the product can be without prior notice.
Need help?
Do you have a question about the SLG5400XAC and is the answer not in the manual?
Questions and answers