1. Manuals
  2. Brands
  3. Lanner Manuals
  4. Computer Hardware
  5. ECA-6051
  6. User manual

Lanner ECA-6051 User Manual

Edge computing appliance platform
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ECA-6051 User Manual
Edge Computing Appliance Platform
Hardware Platforms for Edge Computing
ECA-6051
User Manual
Date of Release:2024-12-25
1
Version: 1.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ECA-6051 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Lanner ECA-6051

Summary of Contents for Lanner ECA-6051

  • Page 1 ECA-6051 User Manual Edge Computing Appliance Platform Hardware Platforms for Edge Computing ECA-6051 User Manual Version: 1.0 Date of Release:2024-12-25...

  • Page 2: About This Document

    - assumed to be qualified in the servicing of computer equipment, such as professional system integrators, or service personnel and technicians. The latest version of this document can be found on Lanner’s official website, available either through the product page or through the Lanner Download Center page with a login account and password.

  • Page 3: Contact Information

    ECA-6051 User Manual Contact Information Taiwan Corporate Headquarters China Lanner Electronics Inc. Beijing L&S Lancom Platform Tech. Co., Ltd. 7F, No.173, Sec.2, Datong Rd. Guodong LOFT 9 Layer No. 9 Huinan Road, Xizhi District, New Taipei City 22184, Huilongguan Town, Changping District, Beijing...

  • Page 4: Copyright And Trademarks

    ECA-6051 User Manual Copyright and Trademarks This document is copyrighted © 2024. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of the original manufacturer.

  • Page 5: Safety Guidelines

    ECA-6051 User Manual Safety Guidelines Follow these guidelines to ensure general safety: Keep the chassis area clear and dust-free during and after installation. Do not wear loose clothing or jewelry that could get caught in the chassis. Fasten your tie or scarf and roll up your sleeves.

  • Page 6: Operating Safety

    The installation of this product must be performed by trained specialists; otherwise, a non-specialist might create the risk of the system’s falling to the ground or other damages. Lanner Electronics Inc. shall not be held liable for any losses resulting from insufficient strength for supporting the system or use of inappropriate installation components.
  • Page 7 ECA-6051 User Manual temperature (Tma) specified by the manufacturer. Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of airflow required for safe operation of the equipment is not compromised. Mechanical Loading - Mounting of the equipment in the rack should be such that a hazardous condition is not achieved due to uneven mechanical loading.

  • Page 8: Electrical Safety Instructions

    ECA-6051 User Manual Electrical Safety Instructions Before turning on the device, ground the grounding cable of the equipment. Proper grounding (grounding) is very important to protect the equipment against the harmful effects of external noise and to reduce the risk of electrocution in the event of a lightning strike. To uninstall the equipment, disconnect the ground wire after turning off the power.

  • Page 9: Table Of Contents

    ECA-6051 User Manual Table of Contents Chapter 1: Product Overview ............11 Package Content ......................... 11 Ordering Information ......................... 11 System Specifications ......................... 12 Front Panel ..........................13 Rear Panel ..........................15 Chapter 2: Motherboard information ..........16 Internal Jumpers and Connector ....................17 Chapter 3: Hardware Setup .............
  • Page 10 ECA-6051 User Manual Boot Menu ..........................89 Save & Exit Menu ........................90 Appendix A: LED Indicator Explanations ........92 Appendix B: Dual BIOS Introduction ..........93 Appendix C: Terms and Conditions ..........95 Warranty Policy .......................... 95...

  • Page 11: Chapter 1: Product Overview

    ECA-6051 User Manual CHAPTER 1: PRODUCT OVERVIEW The ECA-6051 is a Modular Building Block Platform supporting industrial automation, AI-RAN, Large Language Model application with multiple GPU and DPU cards expansion. Main Features Intel® Xeon® 6 Processor Family (Codenamed Sierra Forest-SP/Granite Rapids-SP)

  • Page 12: System Specifications

    ECA-6051 User Manual System Specifications Form Factor 2U 19” Rackmount Intel® Xeon® 6 Processor Family Processor Options (Sierra Forest-SP/ Granit Rapids-SP) Platform CPU Socket 1x LGA 4710 Security Acceleration Intel® QuickAssist Technology BIOS AMI SPI Flash BIOS DDR5 6400MHz RDIMM (Sierra Forest-SP);...

  • Page 13: Front Panel

    ECA-6051 User Manual Front Panel ECA-6051A Description Console Port 1x Type-C Console Port LED Indicators Status / Programmable LED Indicators, refer to Appendix A Power Button 1x Power Button USB Port 1x USB 3.0 Port MGT Port 1x 1GbE RJ45 Management Port...
  • Page 14 ECA-6051 User Manual Front Panel ECA-6051B F3 F4 Description Console Port 1x Type-C Console Port LED Indicators Status / Programmable LED Indicators Power Button 1x Power Button Display Port 1x Mini-DP Port (for VGA Only) MGT Port 1x 1GbE RJ45 Management Port USB Port 1x USB 3.0 Port...

  • Page 15: Rear Panel

    ECA-6051 User Manual Rear Panel Description Smart Fan 6x Smart Cooling Fans...

  • Page 16: Chapter 2: Motherboard Information

    ECA-6051 User Manual CHAPTER 2: MOTHERBOARD INFORMATION Block Diagram...

  • Page 17: Internal Jumpers And Connector

    ECA-6051 User Manual Internal Jumpers and Connector The pin headers on the motherboard are often associated with important functions. With the shunt (Jumper) pushed down on the designated pins (the pin numbers are printed on the circuit board, surrounding the pin header), certain feature can be enabled or disable.
  • Page 18 ECA-6051 User Manual JMCIO1x / JMCIO3x / JMCIO6x : For PCIe Extension Card Implementation Description Description PCIE_RX_DP0 PCIE_TX_DP0 PCIE_RX_DN0 PCIE_TX_DN0 PCIE_RX_DP1 PCIE_TX_DP1 PCIE_RX_DN1 PCIE_TX_DN1 P3V3_AUX SMB_SCL SMB_SDA CLK_100M_DP PERST_P0_N CLK_100M_DN PRESENT_P0_N PCIE_RX_DP2 PCIE_TX_DP2 PCIE_RX_DN2 PCIE_TX_DN2 PCIE_RX_DP3 PCIE_TX_DP3 PCIE_RX_DN3 PCIE_TX_DN3 PCIE_RX_DP4...
  • Page 19 ECA-6051 User Manual JMCIO2x / JMCIO4x : For PCIe Extension Card & Riser Card (ERC-60511) Implementation Description Description PCIE_RX_DP0 PCIE_TX_DP0 PCIE_RX_DN0 PCIE_TX_DN0 PCIE_RX_DP1 PCIE_TX_DP1 PCIE_RX_DN1 PCIE_TX_DN1 P3V3_AUX SMB_SCL VPP_ALERT_N SMB_SDA CLK_100M_A_DP PERST_P0_A_N CLK_100M_A_DN PRESENT_P0_A_N PCIE_RX_DP2 PCIE_TX_DP2 PCIE_RX_DN2 PCIE_TX_DN2 PCIE_RX_DP3 PCIE_TX_DP3...
  • Page 20 ECA-6051 User Manual JFIO: For I/O Board (EIO-60511) Implementation Description Description SGMII_HPM_SCM_DP SGMII_SCM_HPM_DP SGMII_HPM_SCM_DN SGMII_SCM_HPM_DN V_BMC_GFX_VSYNC SMB_BMC_DDC_SDA V_BMC_GFX_RED V_BMC_GFX_GRN PWR_BTN_N PWR_LED_N RST_BTN_N UID_BTN_N SCM_FPGA_UART_TXD UID_LED_N SCM_FPGA_UART_RXD RST_FIO_PERST_N IRQ_FIO_WAKE_LVC3_N STATUS_LED_GREEN_N STATUS_LED_AMBER_N FIO_PRESENT_N V_BMC_GFX_HSYNC SMB_HOST_FIO_SCL FM_USBOCI1_N SMB_HOST_FIO_SDA USB_PPON1 MB_PRSNT_N RST_BMC_PHY_N I3C_DBG_TYPEC_SCL I3C_DBG_TYPEC_SDA...
  • Page 21 ECA-6051 User Manual J15: For I/O Board (EIO-60511) Implementation Description Description PCIE_RX_DP0 PCIE_TX_DP0 PCIE_RX_DN0 PCIE_TX_DN0 PCIE_RX_DP1 PCIE_TX_DP1 PCIE_RX_DN1 PCIE_TX_DN1 P3V3_AUX P5V_AUX P3V3_AUX P5V_AUX CLK_100M_DP SCM_BMC_UART1_TXD CLK_100M_DN SCM_BMC_UART1_RXD PCIE_RX_DP2 PCIE_TX_DP2 PCIE_RX_DN2 PCIE_TX_DN2 PCIE_RX_DP3 PCIE_TX_DP3 PCIE_RX_DN3 PCIE_TX_DN3 JFAN1~ JFAN6: For Cooling Fan Implementation...
  • Page 22 Description Description P12V_SOUTH P12V_SOUTH P12V_SOUTH P12V_SOUTH JMCIOxP: For PCIe extension Card Power Supply Description Description P12V P3V3 P3V3_AUX JESPI80PORT: For Lanner eSPI Debug Fixture Connectivity Description Description ESPI_CLK ESPI_IO1 ESPI_RST# ESPI_IO0 ESPI_CS# P3V3 ESPI_IO3 ESPI_IO2 P3V3_AUX JSPI_ROM: For SPI Flash Fixture Connectivity...
  • Page 23 ECA-6051 User Manual JCMOS: For Clear CMOS Description Normal Clear CMOS J1: For Dual BIOS Feature Selection Description Boot from BIOS1 Boot from BIOS2 Dual BIOS enable Dual BIOS disable J2: For Enable Delayed Authentication Mode Description Disable Enable J3: For Clear Password...
  • Page 24 ECA-6051 User Manual J9: For NC-SI Function (EIO-60511) Connectivity Description Description RMII_PKG_ID1 RMII_SCM_RXD0 CLK_50M_RMII_CLK RMII_SCM_RXD1 RMII_SCM_CRS_DV RMII_PKG_ID0 RMII_SCM_TX_EN RMII_SCM_TXD0 RMII_SCM_TXD1 RMII_ARB_OUT RMII_ARB_IN J13: For PSU Control Sideband (EPB-60511) Connectivity Description Description PSU1_PRESENT_N PSU2_PRESENT_N PWROK_PSU PSON_PSU_N PMBUS_ALERT_N PSU_VIN_GOOD PMBUS_SDA PMBUS_SCL SENSE_PSU_P...
  • Page 25 ECA-6051 User Manual Power Board J1: For PSU Control Sideband Connectivity Description Description PSU1_PRESENT_N PSU2_PRESENT_N PWROK_PSU PSON_PSU_N PMBUS_ALERT_N PSU_VIN_GOOD PMBUS_SDA PMBUS_SCL SENSE_PSU_P SENSE_PSU_N J2: For PSU 12V Standby Output Power Connectivity Description Description P12V_AUX...
  • Page 26 ECA-6051 User Manual J3~J8: For PSU 12V Output Power Connectivity Description Description P12V P12V P12V P12V J9: For Riser Card (ERC-60511) 12V Power Connectivity Description Description P12V P12V P12V J10: For PCIe 12V Power Connectivity Description Description P12V P12V SENSE0...
  • Page 27 ECA-6051 User Manual IO Board J1: For EIO-60511 Stack Board Connectivity Description Description P5V_AUX P5V_AUX UART2_TX UART1_TX UART2_RX UART1_RX I3C_DBG_SCL I3C_DBG_SDA STATUS_LED_AMBER_L STATUS_LED_GREEN_L UID_LED_BLUE_L PWR_LED_L PWR_BTN_L...
  • Page 28 ECA-6051 User Manual IO Board J1: For IO Function Connectivity Description Description SMB_BMC_DDC_SDA V_BMC_GFX_VSYNC V_BMC_GFX_GRN V_BMC_GFX_RED PWR_BTN_N PWR_LED_N RST_BTN_N UART2_TX UART2_RX UID_LED_N...
  • Page 29 ECA-6051 User Manual RST_FIO_PERST_N IRQ_FIO_WAKE_LVC3_N STATUS_LED_AMBER_N STATUS_LED_GREEN_N V_BMC_GFX_HSYNC FM_USBOCI1_N SMB_HOST_FIO_SCL USB_PPON1 SMB_HOST_FIO_SDA I3C_DBG_TYPEC_SCL I3C_DBG_TYPEC_SDA USB2_P1_DP SMB_BMC_DDC_SCL USB2_P1_DN V_BMC_GFX_BLU USB3_P1_TX_P USB3_P1_RX_P USB3_P1_TX_N USB3_P1_RX_N J2: For NC-SI Function Connectivity Description Description RMII_SCM_RXD0 CLK_50M_RMII_CLK RMII_SCM_RXD1 RMII_SCM_CRS_DV RMII_SCM_TX_EN RMII_SCM_TXD0 RMII_SCM_TXD1...
  • Page 30 ECA-6051 User Manual J3: For EIO-60512 Stack Board Connectivity Description Description P5V_AUX P5V_AUX UART1_TX UART2_TX UART1_RX UART2_RX I3C_DBG_SCL I3C_DBG_SDA STATUS_LED_AMBER_L STATUS_LED_GREEN_L UID_LED_BLUE_L PWR_LED_L PWR_BTN_L J4: For PCIe Function Connectivity Description Description PCIE_TX_DP0 PCIE_RX_DP0 PCIE_TX_DN0 PCIE_RX_DN0 PCIE_TX_DP1 PCIE_RX_DP1 PCIE_TX_DN1 PCIE_RX_DN1 P5V_AUX...
  • Page 31 ECA-6051 User Manual Riser Card PWR: For 12V Power Input Connectivity Description Description P12V P12V P12V MCIO: For PCIe Function Connectivity Description Description PCIE_RX_DP0 PCIE_TX_DP0 PCIE_RX_DN0 PCIE_TX_DN0 PCIE_RX_DP1 PCIE_TX_DP1 PCIE_RX_DN1 PCIE_TX_DN1 P3V3_AUX SMB_SCL VPP_ALERT_N SMB_SDA CLK_100M_A_DP PERST_P0_A_N CLK_100M_A_DN PRESENT_P0_A_N PCIE_RX_DP2...
  • Page 32 ECA-6051 User Manual PCIE_RX_DN5 PCIE_TX_DN5 VPP_SDA PWRBRK_N VPP_SCL PE_WAKE_N CLK_100M_B_DP PERST_P0_B_N CLK_100M_B_DN PRESENT_P0_B_N PCIE_RX_DP6 PCIE_TX_DP6 PCIE_RX_DN6 PCIE_TX_DN6 PCIE_RX_DP7 PCIE_TX_DP7 PCIE_RX_DN7 PCIE_TX_DN7 IAC-AST2601 IPMI Module JPLD: For CPLD Fixture Connectivity Description Description JTAG_PLD_TCK JTAG_PLD_TDO P2V5_AUX JTAG_PLD_TMS JTAG_PLD_JTAGEN JTAG_PLD_TDI JBMC_UART: For BMC UART Connectivity...

  • Page 33: Chapter 3: Hardware Setup

    ECA-6051 User Manual CHAPTER 3: HARDWARE SETUP To minimize the risk of personal injury, electric shock, or system damage, ensure all power connections are disconnected to fully shut down the device. Additionally, wear ESD protection gloves while carrying out the procedures in this chapter.
  • Page 34 ECA-6051 User Manual 5. Gently slide the cover forwards a bit. 6. Lift the cover up to remove.

  • Page 35: Installing The System Memory

    ECA-6051 User Manual Installing the System Memory The motherboard supports DDR5 registered DIMM memory for heavy-duty operations. The CPU have 8 DIMM sockets (4 on each side). Please follow the steps below to install the DIMM memory modules. 1. Power off the system.

  • Page 36: Installing M.2 Nvme Storage Card (Optional)

    ECA-6051 User Manual Installing M.2 NVMe Storage Card (Optional) The system supports two M.2 M-Key for NVMe storage module expansion. Please follow the steps for installation. 1. Power off the system and open the chassis cover. 2. Locate the M.2 slots on the motherboard.

  • Page 37: Installing The Fhfl Gpu Module I (Optional)

    ECA-6051 User Manual Installing the FHFL GPU Module I (Optional) The ECA-6051 supports module expansion, including one PCIe x16 FHFL double-deck slot for GPU modules like the NVIDIA L40S. GPU installation is complex and must be handled carefully. Review the instructions in this section to ensure you have the required knowledge and meet all necessary requirements.
  • Page 38 ECA-6051 User Manual 5. Align the GPU module to the PCIe socket. Slide the GPU module into the GPU Module PCIe socket until it is completely seated. Make sure the side bar slides in properly. Secure the GPU module to the PCIe bracket with one (1) screw.

  • Page 39: Installing The Fhfl Gpu Module Ii (Eca-6051A Only)

    ECA-6051 User Manual Installing the FHFL GPU Module II (ECA-6051A Only) The ECA-6051A supports a second GPU module expansion, one PCIe x16 FHFL double-deck slot for GPU module like the NVIDIA L40S. GPU installation is complex and must be handled carefully. Review the instructions in this section to ensure you have the required knowledge and meet all necessary requirements.
  • Page 40 ECA-6051 User Manual 4. Locate the PCIe Slot on the left side. Press down on the release tab on the PCIe bracket and slide the bracket out. Release Tab 5. Pick up the PCIe bracket, and unscrew the two (2) screws located on the side of the bracket, then unscrew the two (2) screws found on the bottom of the bracket.
  • Page 41 ECA-6051 User Manual 6. Secure the PCIe socket to the bracket with the original five (5) screws. 7. Then hold down on the release tab and secure the PCIe bracket to the system. Release Tab 8. Gently slide the module tray back into place.

  • Page 42: Installing Fhhl Dpu Module (Eca-6051A Only)

    ECA-6051 User Manual Installing FHHL DPU Module (ECA-6051A Only) The ECA-6051A supports an additional PCIe x16 FHHL dual slot for GPU/DPU module like the NVIDIA Bluefield-3 DPU. GPU/DPU installation is complex and must be handled carefully. Review the instructions in this section to ensure you have the required knowledge and meet all necessary requirements.
  • Page 43 ECA-6051 User Manual 4. Locate the PCIe Slot on the right side. Press down on the release tab on the PCIe bracket and slide the bracket out. Release Tab 5. Pick up the PCIe bracket, and unscrew the two (2) screws located on the side of the bracket, then unscrew the two (2) screws found on the bottom of the bracket.
  • Page 44 ECA-6051 User Manual 6. Flip the PCIe tray over and secure the PCIe socket to the bracket using the original five (5) screws. Power Cable Connector 7. Then hold down on the release tab and secure the PCIe bracket to the system.

  • Page 45: Installing The Storage Drives (Optional)

    ECA-6051 User Manual Installing the Storage Drives (Optional) This system supports two E1.S SSD trays. Please follow the instructions to install the disk drives. 1. Power off the system. Locate the E1.S SSD trays on the front panel. 2. To remove the tray, push the green tab for the tab lever to slide open, and then hold the tab lever to pull out the tray.

  • Page 46: Replacing The Power Supply Units

    ECA-6051 User Manual Replacing the Power Supply Units Power supply units may wear down eventually. Please be noted that ECA-6051 series supports 1600W AC PSUs. Please prepare the power supply units that matching this capacity. 1. Power off the system. Locate the power supply units on the front panel.

  • Page 47: Chapter 4: Bios Setup

    ECA-6051 User Manual CHAPTER 4: BIOS SETUP BIOS is a firmware embedded on an exclusive chip on the system’s motherboard. Lanner's BIOS firmware offering including market-proven technologies such as Secure Boot and Intel Boot Guard technology deliver solid commitments for the shield protection against malware, uncertified sequences and other named cyber threats.

  • Page 48: Main Page

    ECA-6051 User Manual Main Page Setup main page contains BIOS information and project version information. Feature Description BIOS Vendor: American Megatrends Core Version : AMI Kernel version, CRB code base, X64 Compliancy : UEFI version, PI version BIOS Version : BIOS release version...

  • Page 49: Advanced Page

    ECA-6051 User Manual Advanced Page Select the Advanced menu item from the BIOS setup screen to enter the “Advanced” setup screen. Users can select any of the items in the left frame of the screen.
  • Page 50 ECA-6051 User Manual Trusted Computing (TPM 2.0) Feature Options Description Enables or Disables BIOS support for security device. Security Device Enabled O.S. will not show Security Device. TCG EFI protocol Support Disabled and INT1A interface will not be available. Enabled...
  • Page 51 ECA-6051 User Manual Platform Enabled Enable or Disable Platform Hierarchy Hierarchy Disabled Enabled Storage Hierarchy Enable or Disable Storage Hierarchy Disabled Endorsement Enabled Enable or Disable Endorsement Hierarchy Hierarchy Disabled Physical Presence Select to Tell O.S. to support PPI Spec Version 1.2 or Spec Version 1.3.

  • Page 52: Super Io Configuration

    ECA-6051 User Manual Super IO Configuration...

  • Page 53: Serial Port 1 Configuration

    ECA-6051 User Manual Serial Port 1 Configuration Feature Options Description Enabled Serial Port Enable or Disable Serial Port (COM) Disabled Device Settings IO=3F8h; IRQ = 4 Auto IO=3F8h; IRQ=4; IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12; Select an optimal setting for Super IO Change Settings IO=2F8h;...

  • Page 54: Serial Port Console Redirection

    ECA-6051 User Manual Serial Port Console Redirection Feature Options Description Enabled Console Redirection Console Redirection Enable or Disable. Disabled...

  • Page 55: Console Redirection Settings

    ECA-6051 User Manual Console Redirection Settings Feature Options Description Emulation: ANSI: Extended ASCII char set. VT100 VT100: ASCII char set. VT100Plus Terminal Type VT100Plus: Extends VT100 to support color, function keys, etc. VT-UTF8 VT-UTF8: Uses UTF8 encoding to map Unicode chars onto 1 or ANSI more bytes.
  • Page 56 ECA-6051 User Manual Flow control can prevent data loss from buffer overflow. When None sending data, if the receiving buffers are full, a 'stop' signal can Hardware Flow Control be sent to stop the data flow. Once the buffers are empty, a RTS/CTS 'start' signal can be sent to re-start the flow.
  • Page 57 ECA-6051 User Manual PCI Subsystem Settings Feature Options Description Enables or Disables 64bit capable Devices to be Decoded in Above 4G Disabled Above 4G Address Space (Only if System Supports 64-bit PCI Decoding Enabled Decoding) Disabled If system has SR-IOV capable PCIe Devices, this option Enables...

  • Page 58: Usb Configuration

    ECA-6051 User Manual USB Configuration Feature Options Description Enabled Enables Legacy USB support. AUTO option disables legacy support Legacy USB Disabled if no USB devices are connected. DISABLE option will keep USB Support Auto devices available only for EFI applications.
  • Page 59 ECA-6051 User Manual 1 sec USB transfer 5 sec The time-out value for Control, Bulk, and Interrupt transfers. time-out 10 sec 20 sec 1 sec Device reset 5 sec USB mass storage device Start Unit command time-out. time-out 10 sec...

  • Page 60: Network Stack Configuration

    ECA-6051 User Manual Network Stack Configuration Feature Options Description Disabled Network Stack Enables or disables UEFI Network Stack Enabled IPv4 PXE Disabled Enable/Disable IPv4 PXE boot support. If disabled, IPv4 PXE Support Enabled boot support will not be available. IPv4 HTTP Disabled Enable/Disable IPv4 HTTP boot support.

  • Page 61: Nvme Configuration

    ECA-6051 User Manual NVMe Configuration...
  • Page 62 ECA-6051 User Manual Control PXE Boot Feature Options Description Control PXE Boot from which Lan Control PXE Disable Note: LAN port is set with Intel I210, the setup menu item is Boot from Enable Enable or Disable PXE Boot function via Intel I210 LAN port...
  • Page 63 ECA-6051 User Manual...
  • Page 64 ECA-6051 User Manual Intel VROC...

  • Page 65: Platform Configuration

    ECA-6051 User Manual Platform Configuration Select the Platform menu item from the BIOS setup screen to enter the Platform Setup screen. Users can select any of the items in the left frame of the screen. Feature Options Description Power On...

  • Page 66: Socket Configuration

    ECA-6051 User Manual Socket Configuration Select the Socket menu item from the BIOS setup screen to enter the Socket Setup screen. Users can select any of the items in the left frame of the screen. Feature Options Description Processor Displays and provides option to change the Processor...

  • Page 67: Processor Configuration

    ECA-6051 User Manual Processor Configuration Feature Options Description Disabled Machine Check Enable or Disable the Machine Check Enabled Hardware Disabled MLC Streamer Prefetcher (MSR 1A4h Bit[0]) Prefetcher Enabled Adjacent Cache Disabled MLC Spatial Prefetcher (MSR 1A4h Bit[1]) Prefetcher Enabled APIC Physical...
  • Page 68 ECA-6051 User Manual Disabled Enable Intel® TXT Enables Intel(R) TXT Enabled Disabled Enables the Vanderpool Technology, which takes effect Enabled after reboot. Disabled Enable SMX Enables Safer Mode Extensions Enabled...
  • Page 69 ECA-6051 User Manual Per-Socket Configuration...
  • Page 70 ECA-6051 User Manual CPU Socket0 Configuration Feature Options Description 0: Enable all cores. FFFFFFFFFFF: Disable all cores least one Disable Bitmap (Hex) core per CPU must be enabled. Disabling all cores is an invalid configuration.

  • Page 71: Memory Configuration

    ECA-6051 User Manual Memory Configuration Feature Options Description Auto Maximum Memory Frequency Selections in MT/s. If the "AUTO" 4800 option has been selected, a frequency is chosen automatically Host Memory 5200 based on the minimum tCK given by the SPD. If Enforce POR is...

  • Page 72: Iio Configuration

    ECA-6051 User Manual IIO Configuration Feature Options Description Socket0 None PCI Express Root Port setting page. Configuration Intel VT for Intel VT-d technology setting page. Note: If no understand None Directed I/O (VT-d) setting affection, please do not change setting in page.

  • Page 73: Socket0 Configuration

    ECA-6051 User Manual Socket0 Configuration Feature Options Description PCI Express 0~5 can adjust root port setting, such as bifurcation, VMD… PCI Express None Note: Base on HW design, PCI Express 1 will affect BMC and External USB Port Feature Options...
  • Page 74 ECA-6051 User Manual Auto x4x4x4x4 x4x4x_x8 x_x8x4x4 x_x8x_x8 x_x_x_x16 x2x2x4x_x8 x4x2x2x_x8 x_x8x2x2x4 x2x2x4x4x4 x4x2x2x4x4 Selects PCIe port Bifurcation for selected slot(s) x4x4x2x2x4 "Port Format: xGxExCxA" x2x2x2x2x_x8 "The port can further be x2x2" Bifurcation x2x2x2x2x4x4 "Disable - disable all PCIe lanes and the controller.

  • Page 75: Global Configuration

    ECA-6051 User Manual Global Configuration Feature Options Description ASPM Support Disable This option can disable ASPM support for all PCIe root ports. (Global) Per-Port Extended Tag Disable This option can disable 8-bit Tag support in all PCIe root ports. Support Auto 'Auto' keeps hardware default.

  • Page 76: Advanced Power Management Configuration

    ECA-6051 User Manual Advanced Power Management Configuration...
  • Page 77 ECA-6051 User Manual CPU P State Control Feature Options Description SpeedStep Disabled Enables or disables EIST (P-States) (Pstates) Enabled HW_ALL EIST PSD Function Choose HW_ALL/SW_ALL in _PSD return SW_ALL Boot performance Max Performance Select the performance state that the BIOS will set before...
  • Page 78 ECA-6051 User Manual Enable/Disable Energy Efficient Turbo. Enable Energy Efficient Turbo Enable: MSR 0x1FC Bit [19] = 0 Disable Disable: MSR 0x1FC Bit [19] = 1. Enable/Disable CPU Flex Ratio Programming CPU Flex Ratio Disabled NOTE: Dynamic SST-PP and SST-BF will be disabled when...
  • Page 79 ECA-6051 User Manual CPU C State Control Feature Options Description Disable Monitor MWAIT Allows Monitor and MWAIT instructions. Enable ACPI C1 Enumerate C1/C1e as ACPI C1. Enumeration Disabled AUTO: Maps to C6S-P as ACPI C2 C6S as ACPI C2 Disable: Don't enumerate any C6S state in ACPI...

  • Page 80: Server Mgmt

    ECA-6051 User Manual Server Mgmt Feature Options Description Enabled BMC Support Enable or disables interfaces to communicate with BMC. Disabled Wait For BMC response for specified time out. In PILOTII, Enabled BMC starts at the same time when BIOS starts during AC...
  • Page 81 ECA-6051 User Manual Do Nothing Configure how the system should respond if the OS Boot OS Wtd Timer Reset Watchdog Timer expires. Not available if OS Boot Watchdog Policy Power Down Timer is disabled. Power Cycle System Event Log Press <Enter> to change the SEL event log configuration.

  • Page 82: System Event Log

    ECA-6051 User Manual System Event Log Feature Options Description Disabled Change this to enable or disable event logging for SEL Components Enabled error/progress codes during boot. Erase SEL Yes, On next reset Choose options for erasing SEL. Yes, On every reset...

  • Page 83: Bmc Network Configuration

    ECA-6051 User Manual BMC Network Configuration...
  • Page 84 ECA-6051 User Manual Feature Options Description Unspecified Select to configure LAN channel parameters statically or Configuration Static dynamically (by BIOS or BMC). The unspecified option will Address source DynamicBmcDhcp not modify any BMC network parameters during BIOS phase. DynamicBmcNoDhcp...
  • Page 85 ECA-6051 User Manual View System Event Log...

  • Page 86: Security

    ECA-6051 User Manual Security Select the Security menu item from the BIOS setup screen to enter the Security Setup screen. Users can select any of the items in the left frame of the screen. Feature Description If ONLY the Administrator's password is set, it only limits access to Administrator Password Setup and is only asked for when entering Setup.

  • Page 87: Secure Boot

    ECA-6051 User Manual Secure Boot Feature Options Description Secure Boot feature is Active if Secure Boot is Enabled, Platform Key Disabled Secure Boot (PK) is enrolled and the System is in User mode. The mode change Enabled requires platform reset Secure Boot mode options: Standard or Custom.

  • Page 88: Key Management

    ECA-6051 User Manual Key Management Feature Options Description Factory Key Disabled Install factory default Secure Boot keys after the platform reset Provision Enabled and while the System is in Setup mode Restore Force System to User Mode. Install factory default Secure Boot...

  • Page 89: Boot Menu

    ECA-6051 User Manual Boot Menu Select the Boot menu item from the BIOS setup screen to enter the Boot Setup screen. Users can select any of the items in the left frame of the screen. Feature Options Description Setup Prompt Number of seconds to wait for setup activation key.

  • Page 90: Save & Exit Menu

    ECA-6051 User Manual Save & Exit Menu Select the Save and Exit menu item from the BIOS setup screen to enter the Save and Exit Setup screen. Users can select any of the items in the left frame of the screen.
  • Page 91 ECA-6051 User Manual ■ Restore Defaults Restore default values for all setup options. Select “Yes” to load Optimized defaults. Note The items under Boot Override may not have the same image as above, as it would depend on the actual devices connected on system.

  • Page 92: Appendix A: Led Indicator Explanations

    ECA-6051 User Manual APPENDIX A: LED INDICATOR EXPLANATIONS System Status / Programmable Red/Green: System Status Amber: Programmable LED COLOR LED ACTION DESCRIPTION Green Steady Control by GPIO System Steady Control by GPIO Status Control by GPIO (Default) or NO Power On...

  • Page 93: Appendix B: Dual Bios Introduction

    To provide increased flexibility and usage protection, Lanner has released the 2nd Gen Dual BIOS function on Lanner appliances. With 2nd Gen Dual BIOS, both the primary BIOS and secondary BIOS can be updated and flashed using the BIOS Tool to run different versions of BIOS ROMS independently for maximum compatibility.
  • Page 94 Lanner Technical Support. Warning DO NOT power off or reset the system during BIOS updating process. Disclaimer Under no circumstances will Lanner accept responsibility or liability for damages of any kind whatsoever resulting or arising directly or indirectly from a BIOS update.

  • Page 95: Appendix C: Terms And Conditions

    ECA-6051 User Manual APPENDIX C: TERMS AND CONDITIONS Warranty Policy 1. All products are under warranty against defects in materials and workmanship for a period of one year from the date of purchase. 2. The buyer will bear the return freight charges for goods returned for repair within the warranty period;...

  • Page 96: Rma Service Request Form

    ECA-6051 User Manual RMA Service Request Form When requesting RMA service, please fill out the following form. Without this form enclosed, your RMA cannot be processed.

Table of Contents